Vietnam Export Data for Wide Hot-Rolled Steel Strip Under HS Code 721113

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

ENGINE PLATE WASHER FLAT WAND ASSY,SEAMLESS, CHROME PLATED

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

FREIGHT COLLECT HAMMOCK UNIVERSAL STAND V2 - STAINLESS STEEL - BLUE HAMMOCK UNIVERSAL STAND V1 - STEEL - BLACK HAMMOCK UNIVERSAL STAND V1 - STEEL - BLUE HAMMOCK UNIVERSAL STAND V1 - STEEL - SKY HAMMOCK UNIVERSAL STAND V1 - STEEL - PEACOCK HAMMOCK UNIVERSAL STAND V2 - STEEL - BROWN HAMMOCK UNIVERSAL STAND V2 - STEEL - RED HAMMOCK UNIVERSAL STAND V2 - STEEL - GREY HAMMOCK UNIVERSAL STAND V2 - STEEL - SKY HAMMOCK UNIVERSAL STAND V2 - STEEL - PEACOCK PO PO95468-AVP01-01 SPREETAIL WAREHOUSE: NANTICOKE, PA ( )EMAIL: SH-AM-US-LAX IMPORTSZONE CEVALOGISTICS.COM OCEAN SPREETAIL.COM EIN NO. 83-417220300 ( ) TEL:+1 8173295252, FAX:+1 8173295260 ERIC TSAI SHP ID:EIN953173161 TOTAL PKGS 1497 PKGS 2ND NOTIFY:DIMERCO EXPRESS (USA) CORP.- DALLABRANCH 750 PORT AMERICA PLACE, SUITE 220 GRAPEVINE, TEXAS, US, 76051 JADE J YANG DIMERCO.COM ERIC E TSAI DIMERCO.C( )

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel uses mold, HK steel, flat rolling, hot rolling, 4 -sided handle, cross -section of HCN, TP: C: 0.46%, MN: 0.58%, Si: 0.2%, S: 0.005%) KT : 35.1*300*300mm The common type of sheet (unprocessed, plated, coated);.#&Thép S45C dùng GC khuôn, bằng thép không HK,cán phẳng,cán nóng,được cán 4 mặt,mặt cắt ngang HCN,TP:C:0.46%,Mn:0.58%,Si:0.2%,S:0.005%) KT:35.1*300*300mm dạng tấm phổ dụng( chưa phủ, mạ,tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel uses mold, HK steel, flat rolling, hot rolling, 4 -sided handle, cross -section of HCN, TP: C: 0.46%, MN: 0.58%, Si: 0.2%, S: 0.005%) KT : 22.1*300*400mm The common type of sheet (not covered, plated, coated);.#&Thép S45C dùng GC khuôn, bằng thép không HK, cán phẳng, cán nóng, được cán 4 mặt, mặt cắt ngang HCN,TP:C:0.46%,Mn:0.58%,Si:0.2%,S:0.005%) KT: 22.1*300*400mm dạng tấm phổ dụng( chưa phủ, mạ,tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel uses mold, HK steel, flat rolling, hot rolling, 4 -sided handle, cross -section of HCN, TP: C: 0.46%, MN: 0.58%, Si: 0.2%, S: 0.005%) KT : 6*200*500 mm (unprocessed, plated, coated), strip belt;.#&Thép S45C dùng GC khuôn, bằng thép không HK, cán phẳng, cán nóng, được cán 4 mặt, mặt cắt ngang HCN, TP:C: 0.46%, Mn: 0.58%, Si: 0.2%, S: 0.005%) KT:6*200*500 mm (chưa phủ, mạ,tráng),dạng đai dải

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel uses mold, HK steel, flat rolling, hot rolling, 4 -sided handle, cross -section of HCN, TP: C: 0.46%, MN: 0.58%, Si: 0.2%, S: 0.005%) KT : 60*200*250mm Massable sheet (unprocessed, plated, coated);.#&Thép S45C dùng GC khuôn, bằng thép không HK,cán phẳng,cán nóng,được cán 4 mặt, mặt cắt ngang HCN,TP:C:0.46%,Mn:0.58%,Si:0.2%,S:0.005%)KT:60*200*250mm dạng tấm phổ dụng( chưa phủ, mạ, tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel, alloy steel is rolled flat, hot rolled, content C <0.6%calculated by weight (C: 0.46%, CR: 0%, MN: 0.58%, Si: 0.2%, S: 0.005%) thick*width*long: 20.1*300*300mm (unprocessed, plated or coated);.#&Thép S45C,thép không hợp kim được cán phẳng,cán nóng,hàm lượng C < 0.6% tính theo trọng lượng (C: 0.46%, Cr: 0%, Mn: 0.58%, Si: 0.2%, S: 0.005%)dày*rộng*dài:20.1*300*300mm(chưa phủ, mạ hoặc tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel, alloy steel is rolled flat, hot rolled, content C <0.6%calculated by weight (C: 0.46%, CR: 0%, MN: 0.58%, Si: 0.2%, S: 0.005%) thick*width*long: 11.1*300*400mm (unprocessed, plated or coated);.#&Thép S45C,thép không hợp kim được cán phẳng,cán nóng,hàm lượng C < 0.6% tính theo trọng lượng (C: 0.46%, Cr: 0%, Mn: 0.58%, Si: 0.2%, S: 0.005%)dày*rộng*dài:11.1*300*400mm(chưa phủ, mạ hoặc tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

S45C steel, alloy steel is rolled flat, hot rolled, content C <0.6%calculated by weight (C: 0.46%, CR: 0%, MN: 0.58%, Si: 0.2%, S: 0.005%) thick*width*long: 10.1*300*400mm (unprocessed, plated or coated);.#&Thép S45C,thép không hợp kim được cán phẳng,cán nóng,hàm lượng C < 0.6% tính theo trọng lượng (C: 0.46%, Cr: 0%, Mn: 0.58%, Si: 0.2%, S: 0.005%)dày*rộng*dài:10.1*300*400mm(chưa phủ, mạ hoặc tráng)

Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief

Steel plate, size 1500x1500x5, 1500x1000x12. Repairing a scratch tape cartridge;Thép tấm, kích thước 1500x1500x5 ,1500x1000x12. Sửa chữa thành hộp băng cào