What is HS code 391990 in Romania?

HS code 391990 covers Selfadhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls : Other in Romania. It sits in Chapter 39 (Plastics and articles thereof), Heading 3919 of the Harmonized System, and is classified under CN / TARIC.

Is HS code 391990 the same across all countries?

Yes — up to the 6-digit level, HS code 391990 is the same in every WCO member country. Beyond 6 digits, each country extends the code for national tariff and statistical use. Romania extends it under CN / TARIC.

What system does Romania use to classify HS code 391990?

Romania classifies products under the Combined Nomenclature / TARIC (CN / TARIC; locally Nomenclatura Combinată), which extends HS codes to 10 digits. The first 6 digits align with the WCO Harmonized System, and the rest cover national tariff and statistical needs.

Where can I officially look up HS code 391990 in Romania?

The official source is https://vama.gov.ro/. For faster cross-country lookups, TradeInt's HS Code Tool consolidates classifications across all major countries in one place.

HS Code 391990 Other Self-Adhesive Plastic Films in Romania

HS Code 391990

Selfadhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls : Other

HS Code 3919902000

Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers, of plastics

HS Code 3919908022

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm

HS Code 3919908028

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: -coated on one side with an acrylic UV-sensitive adhesive and a liner -of a total thickness of 65 ?m or more without release liner

HS Code 3919908053

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90|º of more than 25|N/cm (as determined by the ASTM D 3330|method)

HS Code 3919908099

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Other

HS Code 3919908041

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs

HS Code 3919908051

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50?m or more but not exceeding 90?m, covered on one side with an adhesive layer and a release sheet

HS Code 3919908043

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Black poly(vinyl chloride) film:•with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

HS Code 3919908026

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Ethylene vinyl acetate film: -|of|a thickness of 100|µm or more, -|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester|or polypropylene liner

HS Code 3919908023

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Film consisting of 1|to 3|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

HS Code 3919908010

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : For use in certain types of aircraft

HS Code 3919908019

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Other : Transparent poly(ethylene terephthalate) self-adhesive film: -|free from impurities or faults, -|coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, -|whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, -|with a total thickness without the liner of 54|?m or more but not more than 64|?m, and -|a width of more than 1|295|mm but not more than 1|305|mm

HS Code 3919908054

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Poly(vinyl chloride) film, on one side covered with- a polymer layer- an adhesive layer- a release liner, on one side embossed, containing oblate spheres;whether or not on the other side covered with an adhesive layer and a metallised polymer layer

HS Code 3919908020

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than| 200|°C, and a polyester liner

HS Code 3919908037

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Polyethylene or polycarbonate film, cut into ready to use forms, -|one side partly printed whereby part of the printing either gives information about the meaning of LED's visible at the unprinted areas, or marks those points which must be touched to operate the system, -|the other side partly covered with an adhesive layer, -|both sides covered with a release liner, and -|with dimensions of not more than 14|cm x 2,5|cm,for use in the manufacture of push-button switches for mechatronic system adjustable furniture

HS Code 3919908021

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Polytetrafluoroethylene film, -|with a thickness of 50|µm or more but not more than 155|µm, -|with a width of 6,30|mm or more but not more than 585|mm, -|an elongation at break of not more than 200|%, and -|coated on one side with a pressure sensitive silicone adhesive with a thickness|of not more than 40|µm

HS Code 3919908030

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet

HS Code 3919908082

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting film consisting of:-|a polyurethane layer,-|a glass microspheres layer,-|a metallised aluminium layer, and-|an adhesive, covered on one or both sides with a release liner,-|whether or not a poly(vinyl chloride) layer,-|a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use

HS Code 3919908031

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

HS Code 3919908049

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet

HS Code 3919908024

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting laminated sheet: -|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -|covered on both sides with one or more layers of plastic material and -|covered on one side with an adhesive layer and a release sheet

HS Code 3919908035

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflecting layered sheet on rolls, with a width of more than 20|cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: -|a layer of polyurethane containing glass micro beads, -|a layer of poly(ethylene vinyl acetate), -|an adhesive layer, and -|a release sheet

HS Code 3919908083

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reflector or diffuser sheets, in rolls, -|for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -|for equal transmission and distribution of light, intended for LCD modules

HS Code 3919908045

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm

HS Code 3919908075

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Rolls of polyethylene foil: -|self-adhesive on one side, -|of a total thickness of 0,025|mm or more, but not more than 0,09|mm, -|of a total width of 60|mm or more, but not more than 1|110|mm,for use in the manufacture of products of Headings 8521 or 8528 for protection purposes

HS Code 3919908080

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides

HS Code 3919908065

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

HS Code 3919908070

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Self-adhesive polishing discs of microporous polyurethane, whether or not|coated with a|pad

HS Code 3919908050

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive;the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester

HS Code 3919908033

Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) : Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60|?m or more, but not more than 70|?m, and with a width of more than 1|245|mm but not more than 1|255|mm

HS Code 391990: Selfadhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls : Other in Romania

What is HS Code 391990 in Romania

Classification Path of HS Code 391990 in Romania

Romania Tariff Classification: Combined Nomenclature / TARIC (CN / TARIC)

Top Trading Product of HS Code 3919

Top Romania import Product Under HS Code 3919

Top Romania export Product Under HS Code 3919

Related HS Code to Romania Other Self-Adhesive Plastic Films (391990)

Frequently Asked Questions