HS Code 8501310053: Small DC Motors (Under 750W)
HS code 8501310053 is an 10-digit code for Small DC Motors (Under 750W), under the 6-digit subheading 850131. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 8501310053HS Code 8501310053 Description by Country
8501310053 is listed across 27 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Austria HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Belgium HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Bulgaria HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Croatia HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Cyprus HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Czech Republic HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Denmark HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Estonia HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Finland HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
France HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Germany HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Greece HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Hungary HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Ireland HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Italy HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Latvia HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Lithuania HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Luxembourg HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Malta HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Netherlands HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Poland HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Portugal HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Romania HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Slovakia HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Slovenia HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Spain HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Sweden HS Code
HS Code 8501310053 DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W : Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller
Frequently Asked Questions
What is HS code 8501310053?
HS code 8501310053 is an 10-digit code for Small DC Motors (Under 750W), under the 6-digit subheading 850131 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 8501310053 the same in every country?
Which countries use HS code 8501310053?