HS Code 8501109964: Small Electric Motors
HS code 8501109964 is an 10-digit code for Small Electric Motors, under the 6-digit subheading 850110. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 8501109964HS Code 8501109964 Description by Country
8501109964 is listed across 28 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Austria HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Belgium HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Bulgaria HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Croatia HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Cyprus HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Czech Republic HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Denmark HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Estonia HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Finland HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
France HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Germany HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Greece HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Hungary HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Ireland HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Italy HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Latvia HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Lithuania HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Luxembourg HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Malta HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Netherlands HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Poland HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Portugal HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Romania HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Slovakia HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Slovenia HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Spain HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Sweden HS Code
HS Code 8501109964 DC motors of an output <= 37,5 W : DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/ 0,1), -of a specified temperature range of 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
United Kingdom HS Code
HS Code 8501109964 Dc motor to control angular position of the flap to adjust gas flow in the air throttle and egr valve: -with ingress protection (ip) standard of ip69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12.0 v (± 0.1), -of a specified temperature range of - 40 °c or more but not more than 165 °c, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Frequently Asked Questions
What is HS code 8501109964?
HS code 8501109964 is an 10-digit code for Small Electric Motors, under the 6-digit subheading 850110 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 8501109964 the same in every country?
Which countries use HS code 8501109964?