HS Code 7607119076: Rolled Aluminium Foil
HS code 7607119076 is an 10-digit code for Rolled Aluminium Foil, under the 6-digit subheading 760711. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 7607119076HS Code 7607119076 Description by Country
7607119076 is listed across 28 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Austria HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Belgium HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Bulgaria HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Croatia HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Cyprus HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Czech Republic HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Denmark HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Estonia HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Finland HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
France HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Germany HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Greece HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Hungary HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Ireland HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Italy HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Latvia HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Lithuania HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Luxembourg HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Malta HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Netherlands HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Poland HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Portugal HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Romania HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Slovakia HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Slovenia HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Spain HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
Sweden HS Code
HS Code 7607119076 Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) : Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm,- of a flatness measurement: I-unit ±4,- having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,- of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %for use in the manufacture of slats for blinds Of a thickness of 0.2 mm Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil Other Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers For use as body panels in the automotive industry
United Kingdom HS Code
HS Code 7607119076 For use as body panels in the car industry
Frequently Asked Questions
What is HS code 7607119076?
HS code 7607119076 is an 10-digit code for Rolled Aluminium Foil, under the 6-digit subheading 760711 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 7607119076 the same in every country?
Which countries use HS code 7607119076?