HS Code 7308909811: Other Steel Structures and Parts
HS code 7308909811 is an 10-digit code for Other Steel Structures and Parts, under the 6-digit subheading 730890. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 7308909811HS Code 7308909811 Description by Country
7308909811 is listed across 28 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Austria HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Belgium HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Bulgaria HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Croatia HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Cyprus HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Czech Republic HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Denmark HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Estonia HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Finland HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
France HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Germany HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Greece HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Hungary HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Ireland HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Italy HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Latvia HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Lithuania HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Luxembourg HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Malta HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Netherlands HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Poland HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Portugal HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Romania HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Slovakia HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Slovenia HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Spain HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Sweden HS Code
HS Code 7308909811 Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) : Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
United Kingdom HS Code
HS Code 7308909811 Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled
Frequently Asked Questions
What is HS code 7308909811?
HS code 7308909811 is an 10-digit code for Other Steel Structures and Parts, under the 6-digit subheading 730890 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 7308909811 the same in every country?
Which countries use HS code 7308909811?