HS Code 73066110: Welded Square Steel Tubes

Q: Is HS code 73066110 the same in every country?

Up to 6 digits (730661) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Q: Which countries use HS code 73066110?

73066110 is listed across 84 countries' HS schedules in the table above, each with its national code and local description.

HS code 73066110 is an 8-digit code for Welded Square Steel Tubes, under the 6-digit subheading 730661. The first 6 digits are standardized worldwide; the digits beyond are set by each country.

See real import & export shipment data for 73066110

HS Code 73066110 Description by Country

73066110 is listed across 84 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.

Albania HS Code

HS Code 73066110000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Algeria HS Code

HS Code 7306611000 Tubes, tuyaux et profilés creux soudés, de section carrée ou rectangulaire, en fer ou en acier : En aciers inoxydables

Armenia HS Code

HS Code 7306611001 Other, welded, of non-circular cross-section: Of square or rectangular cross-section: with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft: Description not available at the 10-digit level

Austria HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Azerbaijan HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : of stainless steel

Belarus HS Code

Belgium HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Bosnia and Herzegovina HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of stainless steel

Botswana HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With a wall thickness not exceeding 2 mm

Brunei Darussalam HS Code

HS Code 7306611000 Other, welded, of non-circular cross-section : Of square or rectangular cross-section : With an external diagonal cross-section less than 12.5 mm

Bulgaria HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Cambodia HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With an external diagonal cross-section less than 12.5 mm

Canada HS Code

HS Code 7306611000 Tubes,pipes,al/s,wld, of sq or rect c-sect,distillation/recovery natural gas

Comoros HS Code

HS Code 73066110 Tubes, tuyaux et profilés creux soudés, de section carrée ou rectangulaire, en fer ou en acier: Galvanisés

Croatia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Cyprus HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Czech Republic HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Denmark HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Djibouti HS Code

HS Code 73066110 Tubes, tuyaux et profilés creux soudés, de section carrée ou rectangulaire, en fer ou en acier: Laine (paille) de bois; farine de bois: Tissus obtenus à partir de fils à haute ténacité de rayonne viscose: En fils de diverses couleurs: Galvanisés

Estonia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Eswatini HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With a wall thickness not exceeding 2 mm

Fiji HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Having internal and external circular cross- sections, the internal diameter of which does not exceed 63.50 mm; having internal and external rectangular cross-sections, the internal area of which does not exceed 2581 mm2

Finland HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

France HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Georgia HS Code

HS Code 73066110000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of stainless steel

Germany HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Gibraltar HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of stainless steel

Greece HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Hungary HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Indonesia HS Code

HS Code 73066110 With an external diagonal cross-section less than 12.5 mm

Iran (Islamic Republic of) HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of an outer diameter less than 203.2 mm

Ireland HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Israel HS Code

HS Code 73066110 Other, welded, of noncircular crosssection: Of square or rectangular crosssection: Of stainless steel

Italy HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Japan HS Code

HS Code 730661100 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel > Of square or rectangular cross-section > 1 Of alloy steel

Jordan HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel: Tubes over the thickness of 8 mm,imported by factories as industrial inputs

Kazakhstan HS Code

Korea, Republic of HS Code

HS Code 7306611010 Galvanized

Kosovo HS Code

HS Code 7306611010 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of stainless steel : With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(1)

Kyrgyzstan HS Code

Lao, People's Democratic Republic HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With an external diagonal cross-section less than 12.5 mm

Latvia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Lesotho HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With a wall thickness not exceeding 2 mm

Liechtenstein HS Code

HS Code 73066110 other, welded, of non-circular cross-section: of square or rectangular cross-section: not surface-treated

Lithuania HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Luxembourg HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Malawi HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Galvanised

Malaysia HS Code

HS Code 7306611000 OTHER TUBES, PIPES AND HOLLOW PROFILES (FOR EXAMPLE, OPEN SEAM OR WELDED, RIVETED OR SIMILARLY CLOSED), OF IRON OR STEEL. OTHER, WELDED, OF NON-CIRCULAR CROSS-SECTION:OF SQUARE OR RECTANGULAR CROSS-SECTION:WITH EXTERNAL DIAGONAL CROSS-SECTION LESS THAN 12.5 MM

Malta HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Mauritius HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Galvanised

Mayotte HS Code

HS Code 73066110 Autres tubes, tuyaux et profilés creux (soudés, rivés, agrafés ou à bords simplement rapprochés, par exemple), en fer ou en acier: autres, soudés, de section non circulaire: de section carrée ou rectangulaire: en aciers inoxydables

Moldova, Republic of HS Code

HS Code 730661100 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Montenegro HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Morocco HS Code

HS Code 7306611000 Autres tubes, tuyaux et profilés creux (soudés, rivés, agrafés ou à bords simplement rapprochés, par exemple), en fer ou en acier: Autres, soudés, de section non circulaire: De section carrée ou réctangulaire: d’une épaisseur maximale de 4 mm

Myanmar HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With an external diagonal cross-section less than 12.5 mm

Namibia HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With a wall thickness not exceeding 2 mm

Netherlands HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

North Macedonia, Republic of HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Norway HS Code

HS Code 73066110 Subgroup of: 730661 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel

Palestine, State of HS Code

HS Code 73066110 Other, welded, of noncircular crosssection: Of square or rectangular crosssection: Of stainless steel

Philippines HS Code

HS Code 73066110 Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: Other, welded, of noncircular cross section: Of square or rectangular cross section: With an external diagonal cross-section less than 12.5 mm

Poland HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Portugal HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Romania HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Russian Federation HS Code

Serbia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Singapore HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : With an external diagonal cross-section less than 12.5 mm

Slovakia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Slovenia HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

South Africa HS Code

HS Code 73066110 With a wall thickness not exceeding 2 mm

Spain HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Sri Lanka HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel: Over 20 cm diameter

Sudan HS Code

HS Code 73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Galvanised

Sweden HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel

Switzerland HS Code

HS Code 73066110 other, welded, of non-circular cross-section: of square or rectangular cross-section: not surface-treated

Tajikistan HS Code

Thailand HS Code

HS Code 73066110011 of iron or non-alloy steel and not further worked than hot-rolled vanished or lacquered or oiled or not coated.

Tunisia HS Code

HS Code 73066110016 Autres tubes,tuyaux et profiles creux,en aciers inoxydables,soudes,de section carree ou rectangulaire,d'une epaisseur de paroi n'excedant pas 2mm

Turkey HS Code

HS Code 730661100000 Pipes with square or rectangular cross-section made of stainless steel; welded

Ukraine HS Code

HS Code 7306611000 Other, welded, of circular cross-section, of other alloy steel: With thermal insulation: Of rectangular (including square) cross-section, with a wall thickness: Of corrosion-resistant (stainless) steel

United Kingdom HS Code

HS Code 7306611000 Of stainless steel

United States of America HS Code

HS Code 7306611000 Of iron or nonalloy steel

Uzbekistan HS Code

HS Code 7306611000 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel : Of stainless steel

Viet Nam HS Code

HS Code 73066110 With an external diagonal cross-section less than 12.5 mm

Looking for real shipment records of HS Code 73066110 Welded Square Steel Tubes?

Explore the latest import and export trade data on the TradeInt global trade data platform.

Search 2026 HS Code 73066110 Latest Trade Data

Frequently Asked Questions

What is HS code 73066110?

HS code 73066110 is an 8-digit code for Welded Square Steel Tubes, under the 6-digit subheading 730661 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 73066110 the same in every country?

Which countries use HS code 73066110?