What is HS code 72286010?

HS code 72286010 is an 8-digit code for Other Alloy Steel Bars, under the 6-digit subheading 722860 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72286010 the same in every country?

Up to 6 digits (722860) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72286010?

72286010 is listed across 29 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72286010 Other Alloy Steel Bars by Country

Algeria HS Code

HS Code 7228601000 Barres en aciers alliés autres qu'aciers inoxydables, obtenues ou parachevées à froid et autrement traitées, ou obtenues à chaud et autrement traitées n.d.a. (sauf en aciers à coupe rapide ou aciers silicomanganeux) : En aciers pour outillage

Australia HS Code

HS Code 72286010 "Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Goods, as follows (a) of high alloy steel; (b) ""flattened circles"" and ""modified rectangles"" as defined in Note 1(m) to Chapter 72"

Bolivia (Plurinational State of) HS Code

HS Code 7228601000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras: De sección circular de diámetro inferior o igual a 100 mm

Brunei Darussalam HS Code

HS Code 7228601000 of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods : Of circular cross-section

Cambodia HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Colombia HS Code

HS Code 7228601000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras: De sección circular de diámetro inferior o igual a 100 mm

Comoros HS Code

HS Code 72286010 Barres en aciers alliés autres qu'aciers inoxydables, obtenues ou parachevées à froid et autrement traitées, ou obtenues à chaud et autrement traitées n.d.a. (sauf en aciers à coupe rapide ou aciers silicomanganeux): De section circulaire d'un diamètre égal ou inférieur à 6 mm

Djibouti HS Code

HS Code 72286010 Barres en aciers alliés autres qu'aciers inoxydables, obtenues ou parachevées à froid et autrement traitées, ou obtenues à chaud et autrement traitées n.d.a. (sauf en aciers à coupe rapide ou aciers silicomanganeux): Phosphures, de constitution chimique définie ou non, à l'exclusion des ferrophosphores: Autres résines aminiques: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Ecuador HS Code

HS Code 7228601000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras: De sección circular de diámetro inferior o igual a 100 mm

Indonesia HS Code

HS Code 72286010 Of circular cross-section

Korea, Republic of HS Code

HS Code 7228601000 Concrete reinforcing bars (containing 0.0008% or more boron by weight)

Kuwait HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Lao, People's Democratic Republic HS Code

HS Code 7228601000 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : of circular cross-section

Malawi HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding6mm in diameter

Malaysia HS Code

HS Code 7228601000 OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL.OTHER BARS AND RODS:OF CIRCULAR CROSS-SECTION

Mauritius HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Morocco HS Code

HS Code 7228601000 Barres et profilés en autres aciers alliés; barres creuses pour le forage en aciers alliés ou non alliés: Autres barres: barres en acier allié de construction simplement laminées à chaud, trempées et revenues en vue de la fabrication des ressorts

Myanmar HS Code

HS Code 7228601000 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Oman HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Peru HS Code

HS Code 7228601000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras: De sección circular de diámetro inferior o igual a 100 mm

Philippines HS Code

HS Code 72286010 of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods: Of circular cross-section

Qatar HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Saudi Arabia HS Code

HS Code 722860100000 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter : Description not available beyond the 8-digit level

Singapore HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Sudan HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Thailand HS Code

HS Code 72286010000 Of circular cross-section

United Arab Emirates HS Code

HS Code 72286010 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

United States of America HS Code

HS Code 72286010 Of tool steel (other than high-speed steel)

Viet Nam HS Code

HS Code 72286010 Of circular cross-section

HS Code 72286010: Other Alloy Steel Bars

HS Code 72286010 Description by Country

Frequently Asked Questions