What is HS code 72285010?

HS code 72285010 is an 8-digit code for Cold-Formed Alloy Steel Bars, under the 6-digit subheading 722850 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72285010 the same in every country?

Up to 6 digits (722850) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72285010?

72285010 is listed across 36 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72285010 Cold-Formed Alloy Steel Bars by Country

Algeria HS Code

HS Code 7228501000 Barres en aciers alliés autres qu'aciers inoxydables, simpl. obtenues ou parachevées à froid (sauf en aciers à coupe rapide ou silicomanganeux) : En aciers pour outillage

Bolivia (Plurinational State of) HS Code

HS Code 7228501000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras simplemente obtenidas o acabadas en frío: De sección circular de diámetro inferior o igual a 100 mm

Brunei Darussalam HS Code

HS Code 7228501000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section

Cambodia HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Canada HS Code

HS Code 7228501000 Bars & rods,as,o/t ss,nfwt cf/cfi,mfr rifles govt Can/drill pipe,etc

Colombia HS Code

HS Code 7228501000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras simplemente obtenidas o acabadas en frío: De sección circular de diámetro inferior o igual a 100 mm

Comoros HS Code

HS Code 72285010 Barres en aciers alliés autres qu'aciers inoxydables, simpl. obtenues ou parachevées à froid (sauf en aciers à coupe rapide ou silicomanganeux): De section circulaire d'un diamètre égal ou inférieur à 6 mm

Costa Rica HS Code

HS Code 722850100010 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente obtenidas o acabadas en frío : Con muescas, cordones, surocs o relieves, producidos en el laminado o sometidas a torsión después del lamninado : Cílindricas, lisas o corrugadas

Djibouti HS Code

HS Code 72285010 Barres en aciers alliés autres qu'aciers inoxydables, simpl. obtenues ou parachevées à froid (sauf en aciers à coupe rapide ou silicomanganeux): Phosphures, de constitution chimique définie ou non, à l'exclusion des ferrophosphores: Autres résines aminiques: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Ecuador HS Code

HS Code 7228501000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras simplemente obtenidas o acabadas en frío: De sección circular de diámetro inferior o igual a 100 mm

El Salvador HS Code

HS Code 7228501000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente obtenidas o acabadas en frío

Guatemala HS Code

HS Code 7228501000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente obtenidas o acabadas en frío : Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

Honduras HS Code

HS Code 722850100000 Barras y perfiles, de los demas aceros aleados; barras huecas para perforacion, de aceros aleados o sin alear: Las demás barras, simplemente obtenidas o acabadas en frió: Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

India HS Code

HS Code 72285010 OTHR COLD FORMD/COLD FNSHD BARS AND RODS OF ENGINE VALVES AND COLD HEADING STL

Indonesia HS Code

HS Code 72285010 Of circular cross-section

Israel HS Code

HS Code 72285010 Precision made bar, with smooth and polished surface containing 0.15% to 0.60% sulfur, 0.70% to 1.80% manganese, and up to 0.40% carbon of circular or regular-hexagonal cross-section, where the diameter of the circle is not less than 4 mm or the distance between two parallel ribs of the hexagon (across flats) is not less than 6.35 mm, except a bar whose percentage of chromium exceeds 10%

Japan HS Code

HS Code 722850100 Other bars and rods of other alloy steel; angles, shapes and sections of other alloy steel; hollow drill bars and rods of alloy or non-alloy steel > - Other bars and rods, not further worked than cold-formed or cold-finished > -- Of alloy tool steel

Kuwait HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Lao, People's Democratic Republic HS Code

HS Code 7228501000 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : of circular cross-section

Malawi HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding6mm in diameter

Malaysia HS Code

HS Code 7228501000 OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL.OTHER BARS AND RODS, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED:OF CIRCULAR CROSS-SECTION

Mauritius HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Myanmar HS Code

HS Code 7228501000 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Nicaragua HS Code

HS Code 722850100000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente obtenidas o acabadas en frío : Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

Oman HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Palestine, State of HS Code

HS Code 72285010 Precision made bar, with smooth and polished surface containing 0.15% to 0.60% sulfur, 0.70% to 1.80% manganese, and up to 0.40% carbon of circular or regular-hexagonal cross-section, where the diameter of the circle is not less than 4 mm or the distance between two parallel ribs of the hexagon (across flats) is not less than 6.35 mm, except a bar whose percentage of chromium exceeds 10%

Peru HS Code

HS Code 7228501000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Las demás barras simplemente obtenidas o acabadas en frío: De sección circular de diámetro inferior o igual a 100 mm

Philippines HS Code

HS Code 72285010 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than cold-formed or cold-finished: Of circular cross-section

Qatar HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Saudi Arabia HS Code

HS Code 722850100000 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter : Description not available beyond the 8-digit level

Singapore HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Sudan HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Thailand HS Code

HS Code 72285010000 Of circular cross-section

United Arab Emirates HS Code

HS Code 72285010 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

United States of America HS Code

HS Code 72285010 Of tool steel (other than high-speed steel)

Viet Nam HS Code

HS Code 72285010 Of circular cross-section

HS Code 72285010: Cold-Formed Alloy Steel Bars

HS Code 72285010 Description by Country

Frequently Asked Questions