What is HS code 72283020?

HS code 72283020 is an 8-digit code for Hot-Rolled Alloy Steel Bars, under the 6-digit subheading 722830 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72283020 the same in every country?

Up to 6 digits (722830) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72283020?

72283020 is listed across 65 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72283020 Hot-Rolled Alloy Steel Bars by Country

Albania HS Code

HS Code 72283020000 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Algeria HS Code

HS Code 7228302000 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux) : De section circulaire, d'un diamètre de 80 mm ou plus

Armenia HS Code

HS Code 7228302000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Austria HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Azerbaijan HS Code

HS Code 7228302000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : of tool steel

Belarus HS Code

HS Code 7228302000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Belgium HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Bosnia and Herzegovina HS Code

HS Code 7228302000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of tool steel

Bulgaria HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Comoros HS Code

HS Code 72283020 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux): De section circulaire d'un diamètre supérieur à 6 mm

Croatia HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Cyprus HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Czech Republic HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Denmark HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Djibouti HS Code

HS Code 72283020 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux): Phosphures, de constitution chimique définie ou non, à l'exclusion des ferrophosphores: Autres résines aminiques: De section circulaire d’un diamètre supérieur à 6 mm

Estonia HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Finland HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

France HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Georgia HS Code

HS Code 72283020000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of tool steel

Germany HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Gibraltar HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of tool steel

Greece HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Hungary HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Ireland HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Italy HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Japan HS Code

HS Code 722830200 Other bars and rods of other alloy steel; angles, shapes and sections of other alloy steel; hollow drill bars and rods of alloy or non-alloy steel > - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > -- Of structural alloy steel

Kazakhstan HS Code

HS Code 7228302000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Kosovo HS Code

HS Code 7228302000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of tool steel

Kuwait HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring 8-40 mm in diameter

Kyrgyzstan HS Code

HS Code 7228302000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Latvia HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Liechtenstein HS Code

HS Code 72283020 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: pickled

Lithuania HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Luxembourg HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Malawi HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of a circular cross-section exceeding6mm in diameter

Malta HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Mauritius HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section exceeding 6 mm in diameter

Mayotte HS Code

HS Code 72283020 Barres et profilés en autres aciers alliés; barres creuses pour le forage en aciers alliés ou non alliés: autres barres, simplement laminées ou filées à chaud: en aciers pour outillage

Moldova, Republic of HS Code

HS Code 722830200 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Montenegro HS Code

HS Code 7228302000 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Netherlands HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

North Macedonia, Republic of HS Code

HS Code 7228302000 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Oman HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring 8-40 mm in diameter

Panama HS Code

HS Code 72283020 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear: Las demás barras, simplemente laminadas o extrudidas en caliente: De sección circular

Poland HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Portugal HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Qatar HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring 8-40 mm in diameter

Romania HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Russian Federation HS Code

HS Code 7228302000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Saudi Arabia HS Code

HS Code 722830200000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring 8-40 mm in diameter : Description not available beyond the 8-digit level

Serbia HS Code

HS Code 7228302000 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Slovakia HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Slovenia HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Spain HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Sudan HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular crosss-ection exceeding 6 mm in diameter

Sweden HS Code

HS Code 7228302010 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

Switzerland HS Code

HS Code 72283020 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: pickled

Tajikistan HS Code

HS Code 7228302000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

Tunisia HS Code

HS Code 72283020109 Barres en aciers pour outillage,simplement laminees ou filees a chaud,d'une section formant un cercle applati ou un rectangle modifie

Turkey HS Code

HS Code 722830200000 Bars of tool steel; hot rolled or drawn only

Ukraine HS Code

HS Code 7228302000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of tool steel

United Arab Emirates HS Code

HS Code 72283020 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring 8-40 mm in diameter

United Kingdom HS Code

HS Code 7228302000 Of tool steel

United States of America HS Code

HS Code 7228302000 Of ball-bearing steel

Uzbekistan HS Code

HS Code 7228302000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of tool steel

HS Code 72283020: Hot-Rolled Alloy Steel Bars

HS Code 72283020 Description by Country

Frequently Asked Questions