What is HS code 72283010?

HS code 72283010 is an 8-digit code for Hot-Rolled Alloy Steel Bars, under the 6-digit subheading 722830 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72283010 the same in every country?

Up to 6 digits (722830) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72283010?

72283010 is listed across 35 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72283010 Hot-Rolled Alloy Steel Bars by Country

Algeria HS Code

HS Code 7228301000 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux) : En aciers pour outillage

Australia HS Code

HS Code 72283010 "Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Goods, as follows (a) of high alloy steel; (b) ""flattened circles"" and ""modified rectangles"" as defined in Note 1(m) to Chapter 72"

Brunei Darussalam HS Code

HS Code 7228301000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of circular cross-section

Cambodia HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Canada HS Code

HS Code 7228301011 Flat bars,mold steel,nfw than hot-rolled/drawn/extruded,use in ships, etc

Comoros HS Code

HS Code 72283010 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux): De section circulaire d'un diamètre égal ou inférieur à 6 mm

Costa Rica HS Code

HS Code 722830100010 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente laminadas o extrudidas en caliente : Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado : Cilíndricas, lisas o corrugadas

Djibouti HS Code

HS Code 72283010 Barres en aciers alliés autres qu'aciers inoxydables, simpl. laminées ou filées à chaud (sauf en aciers à coupe rapide ou silicomanganeux): Phosphures, de constitution chimique définie ou non, à l'exclusion des ferrophosphores: Autres résines aminiques: De section circulaire d’un diamètre égal ou inférieur à 6 mm

El Salvador HS Code

HS Code 7228301000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente laminadas o extrudidas en caliente

Guatemala HS Code

HS Code 7228301000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente laminadas o extrudidas en caliente : Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

Honduras HS Code

HS Code 722830100000 Barras y perfiles, de los demas aceros aleados; barras huecas para perforacion, de aceros aleados o sin alear: Las demás barras, simplemente laminadas o extrudidas en caliente: Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

Indonesia HS Code

HS Code 72283010 Of circular cross-section

Iran (Islamic Republic of) HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : of solid rectangle cross-section

Japan HS Code

HS Code 722830100 Other bars and rods of other alloy steel; angles, shapes and sections of other alloy steel; hollow drill bars and rods of alloy or non-alloy steel > - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded > -- Of alloy tool steel

Korea, Republic of HS Code

HS Code 7228301000 Containing 0.0008% or more boron by weight

Kuwait HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Lao, People's Democratic Republic HS Code

HS Code 7228301000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : of circular cross-section

Lebanon HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): no description available at 8-digit level

Liechtenstein HS Code

HS Code 72283010 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: not pickled

Malawi HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding6mm in diameter

Malaysia HS Code

HS Code 7228301000 OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL.OTHER BARS AND RODS, NOT FURTHER WORKED THAN HOT-ROLLED, HOT-DRAWN OR EXTRUDED:OF CIRCULAR CROSS-SECTION

Mauritius HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Myanmar HS Code

HS Code 7228301000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Nicaragua HS Code

HS Code 722830100000 Barras y perfiles, de los demás aceros aleados; barras huecas para perforación, de aceros aleados o sin alear : Las demás barras, simplemente laminadas o extrudidas en caliente : Con muescas, cordones, surcos o relieves, producidos en el laminado o sometidas a torsión después del laminado

Oman HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Pakistan HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Case hardening steel (conforming to aisi-8620, 20mncr5, scm series and equivalent

Philippines HS Code

HS Code 72283010 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: Of circular cross-section

Qatar HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Saudi Arabia HS Code

HS Code 722830100000 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter : Description not available beyond the 8-digit level

Singapore HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section

Sudan HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Switzerland HS Code

HS Code 72283010 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: not pickled

Thailand HS Code

HS Code 72283010010 Containing by weight less than 0.6% of carbon and containing by weight 0.3% or more of aluminium

United Arab Emirates HS Code

HS Code 72283010 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Viet Nam HS Code

HS Code 72283010 Of circular cross-section

HS Code 72283010: Hot-Rolled Alloy Steel Bars

HS Code 72283010 Description by Country

Frequently Asked Questions