What is HS code 72282010?

HS code 72282010 is an 8-digit code for Silico-Manganese Steel Bars, under the 6-digit subheading 722820 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72282010 the same in every country?

Up to 6 digits (722820) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72282010?

72282010 is listed across 70 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72282010 Silico-Manganese Steel Bars by Country

Albania HS Code

HS Code 72282010000 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)"

Algeria HS Code

HS Code 7228201000 Barres en aciers silicomanganeux : De section rectangulaire, laminées à chaud sur les quatre faces

Armenia HS Code

HS Code 7228201000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Australia HS Code

HS Code 72282010 "Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Flattened circles"" and ""modified rectangles"" as defined in Note 1(m) to Chapter 72"

Austria HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Azerbaijan HS Code

HS Code 7228201000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross- section, hot- rolled on four faces

Belarus HS Code

HS Code 7228201000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Belgium HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Bolivia (Plurinational State of) HS Code

HS Code 7228201000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Barras de acero silicomanganeso: De sección circular de diámetro inferior o igual a 100 mm

Bosnia and Herzegovina HS Code

HS Code 7228201000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross-section, hot-rolled on four faces

Bulgaria HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Canada HS Code

HS Code 7228201010 Flat bars of silico-manganese steel,nfw than hr, nes

Colombia HS Code

HS Code 7228201000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Barras de acero silicomanganeso: De sección circular de diámetro inferior o igual a 100 mm

Comoros HS Code

HS Code 72282010 Barres en aciers silicomanganeux: De section circulaire d'un diamètre égal ou inférieur à 6 mm

Croatia HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Cyprus HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Czech Republic HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Denmark HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Djibouti HS Code

HS Code 72282010 Barres en aciers silicomanganeux: Phosphures, de constitution chimique définie ou non, à l'exclusion des ferrophosphores: Autres résines aminiques: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Ecuador HS Code

HS Code 7228201000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Barras de acero silicomanganeso: De sección circular de diámetro inferior o igual a 100 mm

Estonia HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Finland HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

France HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Georgia HS Code

HS Code 72282010000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross-section, hot-rolled on four faces

Germany HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Gibraltar HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross- section, hot-rolled on four faces

Greece HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Hungary HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Ireland HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Italy HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Kazakhstan HS Code

HS Code 7228201000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Kosovo HS Code

HS Code 7228201000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross-section, hot-rolled on four faces

Kuwait HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Kyrgyzstan HS Code

HS Code 7228201000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Latvia HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Lithuania HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Luxembourg HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Malawi HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding6mm in diameter

Malta HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Mauritius HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Mayotte HS Code

HS Code 72282010 Barres et profilés en autres aciers alliés; barres creuses pour le forage en aciers alliés ou non alliés: Barres en aciers silicomanganeux: de section rectangulaire, laminées à chaud sur les quatre faces

Moldova, Republic of HS Code

HS Code 722820100 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)"

Montenegro HS Code

HS Code 7228201000 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)"

Morocco HS Code

HS Code 7228201000 Barres et profilés en autres aciers alliés; barres creuses pour le forage en aciers alliés ou non alliés: Barres en aciers silico-manganeux: barres en acier allié de construction simplement laminées à chaud, trempées et revenues en vue de la fabrication des ressorts

Netherlands HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

North Macedonia, Republic of HS Code

HS Code 7228201000 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)"

Oman HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Pakistan HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Spring steel(sup -9 and equivalent)

Peru HS Code

HS Code 7228201000 Barras y perfiles de los demás aceros aleados; barras huecas para perforación de aceros aleados o sin alear: Barras de acero silicomanganeso: De sección circular de diámetro inferior o igual a 100 mm

Poland HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Portugal HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Qatar HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

Romania HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Russian Federation HS Code

HS Code 7228201000 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Saudi Arabia HS Code

HS Code 722820100000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter : Description not available beyond the 8-digit level

Serbia HS Code

HS Code 7228201000 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)"

Slovakia HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Slovenia HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Spain HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Sudan HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of circular cross-section not exceeding 6 mm in diameter

Sweden HS Code

HS Code 7228201010 "Bars and rods of silico-manganese steel, of rectangular ""other than square"" cross-section, hot-rolled on four faces (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Not further worked than hot-rolled, hot-drawn or extruded"

Taipei, Chinese HS Code

HS Code 72282010006 Other bars and rods, for welding electrodes, of silico-manganese steel

Tajikistan HS Code

HS Code 7228201000 Bars and rods, of silico-manganese steel: Of rectangular (other than square) cross-section, hot-rolled on four faces

Tunisia HS Code

HS Code 72282010007 Barres en aciers silicco-manganeux,de section rectangulaire, laminees a chaud sur les quatre faces

Turkey HS Code

HS Code 722820100000 Bars of silico manganese steel, rolled, rectangular in cross-section, other than square

Ukraine HS Code

HS Code 7228201000 Bars and rods, of silico-manganese steel: Not further worked than hot-rolled, hot-drawn or extruded

United Arab Emirates HS Code

HS Code 72282010 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils): Of circular cross-section measuring less than 8mm in diameter

United Kingdom HS Code

HS Code 7228201010 Not further worked than hot-rolled, hot-drawn or extruded

United States of America HS Code

HS Code 7228201000 Not cold-formed

Uzbekistan HS Code

HS Code 7228201000 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) : Of rectangular (other than square) cross-section, hot-rolled on four faces

HS Code 72282010: Silico-Manganese Steel Bars

HS Code 72282010 Description by Country

Frequently Asked Questions