HS Code 72151010: Free-Cutting Cold-Finished Bars

Q: Is HS code 72151010 the same in every country?

Up to 6 digits (721510) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Q: Which countries use HS code 72151010?

72151010 is listed across 26 countries' HS schedules in the table above, each with its national code and local description.

HS code 72151010 is an 8-digit code for Free-Cutting Cold-Finished Bars, under the 6-digit subheading 721510. The first 6 digits are standardized worldwide; the digits beyond are set by each country.

See real import & export shipment data for 72151010

HS Code 72151010 Description by Country

72151010 is listed across 26 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.

Australia HS Code

HS Code 72151010 "Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished: Flattened circles"" and ""modified rectangles"" as defined in Note 1(l) to Chapter 72"

Bolivia (Plurinational State of) HS Code

HS Code 7215101000 Las demás barras de hierro o acero sin alear: De acero de fácil mecanización simplemente obtenidas o acabadas en frío: De sección circular de diámetro inferior o igual a 100 mm

Brunei Darussalam HS Code

HS Code 7215101000 Other bars and rods of iron or non-alloy steel: Of free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section

Cambodia HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section

Colombia HS Code

Comoros HS Code

HS Code 72151010 Barres en aciers de décolletage non alliés, simpl. obtenues ou parachevées à froid: De section circulaire d'un diamètre égal ou inférieur à 6 mm

Djibouti HS Code

HS Code 72151010 Barres en aciers de décolletage non-alliés, simpl. obtenues ou parachevées à froid: Sabres, épées, baïonnettes, lances et autres armes blanches, leurs parties et leurs fourreaux: Autres unités de machines automatiques de traitement de l'information: De section transversale rectangulaire: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Ecuador HS Code

Fiji HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of a circular cross- section measuring not less than 10 mm but not more than 32 mm in diameter

Indonesia HS Code

HS Code 72151010 Of circular cross-section

Jordan HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished: Of a 5.5 mm diameter or less ,imported by factories as production inputs.

Lao, People's Democratic Republic HS Code

HS Code 7215101000 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : of circular cross-section

Malawi HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section not exceeding6mm in diameter

Malaysia HS Code

HS Code 7215101000 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL.OF FREE-CUTTING STEEL, NOT FURTHER WORKED THAN COLD-FORMED OR COLD-FINISHED:OF CIRCULAR CROSS-SECTION

Mauritius HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section not exceeding 6 mm in diameter

Morocco HS Code

HS Code 7215101000 Autres barres en fer ou en aciers non alliés: En aciers de décolletage, simplement obtenues ou parachevées à froid: de section transversale en forme de cercle aplati ou de rectangle modifié..

Myanmar HS Code

HS Code 7215101000 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section

Norway HS Code

HS Code 72151010 Subgroup of: 721510 Other bars and rods of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished

Pakistan HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of secondary quality

Peru HS Code

Philippines HS Code

HS Code 72151010 Other bars and rods of iron or non-alloy steel: Of free-cutting steel, not further worked than cold-formed or cold-finished: Of circular cross-section

Singapore HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section

Sudan HS Code

HS Code 72151010 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished : Of circular cross-section not exceeding 6 mm in diameter

Thailand HS Code

HS Code 72151010000 Of circular cross-section

Viet Nam HS Code

HS Code 72151010 Of circular cross-section

Yemen HS Code

HS Code 72151010 Other bars and rods of iron or non- alloy steel : Of free-cutting steel, not further worked than cold-formed or cold-finished : For industry

Looking for real shipment records of HS Code 72151010 Free-Cutting Cold-Finished Bars?

Explore the latest import and export trade data on the TradeInt global trade data platform.

Search 2026 HS Code 72151010 Latest Trade Data

Frequently Asked Questions

What is HS code 72151010?

HS code 72151010 is an 8-digit code for Free-Cutting Cold-Finished Bars, under the 6-digit subheading 721510 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72151010 the same in every country?

Which countries use HS code 72151010?