What is HS code 72132010?

HS code 72132010 is an 8-digit code for Free-Cutting Steel Rod Coils, under the 6-digit subheading 721320 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72132010 the same in every country?

Up to 6 digits (721320) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72132010?

72132010 is listed across 33 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72132010 Free-Cutting Steel Rod Coils by Country

Algeria HS Code

HS Code 7213201000 Fil machine en aciers de décolletage non alliés, enroulé en couronnes irrégulières (à l'excl. du fil comportant des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage) : D'une section circulaire d'un diamètre inférieur à 14mm

Benin HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Burkina Faso HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Canada HS Code

HS Code 7213201010 Wire rods,free cutting steel,hr,irreg wound coils,use in CDN manufactures

Comoros HS Code

HS Code 72132010 Fil machine en aciers de décolletage non alliés, enroulé en couronnes irrégulières (à l'excl. du fil comportant des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage): De section circulaire d'un diamètre égal ou inférieur à 6 mm

Congo HS Code

HS Code 72132010 Fil machine en aciers De section circulaire d’un diamètre n’excédant pas 5,5 mm

Côte d'Ivoire HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Djibouti HS Code

HS Code 72132010 Fil machine en aciers de décolletage non-alliés, enroulé en couronnes irrégulières (à l'excl. du fil comportant des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage): Sabres, épées, baïonnettes, lances et autres armes blanches, leurs parties et leurs fourreaux: Autres unités de machines automatiques de traitement de l'information: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Dominican Republic HS Code

HS Code 72132010 Alambrón de hierro o acero sin alear: Los demás, de acero de fácil mecanización: De sección circular y diámetro inferior a 7 mm

Fiji HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of a circular cross- section measuring not less than 10 mm but not more than 32 mm in diameter

Gambia HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Ghana HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Guinea HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Guinea-Bissau HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Israel HS Code

HS Code 72132010 Of a cross-sectional area exceeding 2,500 sqmm

Jordan HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process): Diameter of 5.5 mm or less

Liberia HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Liechtenstein HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: other, of free-cutting steel: not pickled

Malawi HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of circular cross-section not exceeding6mm in diameter

Mali HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Mauritius HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of circular cross-section not exceeding 6 mm in diameter

New Zealand HS Code

HS Code 72132010 "Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of cross-section in the shape of ""flattened circles"" or ""modified rectangles"""

Niger HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Nigeria HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Norway HS Code

HS Code 72132010 Subgroup of: 721320 Bars and rods of non-alloy free-cutting steel, in irregularly wound coils 'ecsc'

Pakistan HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of secondary quality

Palestine, State of HS Code

HS Code 72132010 Of a cross-sectional area exceeding 2,500 sqmm

Senegal HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Sierra Leone HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Sudan HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) : Of circular cross-section not exceeding 6 mm in diameter

Switzerland HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: other, of free-cutting steel: not pickled

Togo HS Code

HS Code 7213201000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other, of free-cutting steel: Of circular cross-section measuring less than or equal to 5.5 mm in diameter

Yemen HS Code

HS Code 72132010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non- alloy steel : Other, of free-cutting steel : For industry

HS Code 72132010: Free-Cutting Steel Rod Coils

HS Code 72132010 Description by Country

Frequently Asked Questions