What is HS code 72131010?

HS code 72131010 is an 8-digit code for Ribbed Rebar Coils, under the 6-digit subheading 721310 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72131010 the same in every country?

Up to 6 digits (721310) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72131010?

72131010 is listed across 40 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72131010 Ribbed Rebar Coils by Country

Anguilla HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of iron

Antigua and Barbuda HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Bars and rods of iron containing indentations, ribs, grooves or other deformations produced during rolling process

Barbados HS Code

HS Code 72131010000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Bars/rods, hot-rolled in irregularly wound coils, of iron, containing indentations, ribs etc.

Belize HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of iron

Brunei Darussalam HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Containing indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section measuring not exceeding 50 mm in diameter

Cambodia HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section measuring not exceeding 50 mm in diameter

Comoros HS Code

HS Code 72131010 Fil machine en fer ou en aciers non alliés, enroulé en couronnes irrégulières, avec indentations, bourrelets, creux ou reliefs obtenus lors du laminage: De section circulaire d'un diamètre égal ou inférieur à 6 mm

Djibouti HS Code

HS Code 72131010 Fil machine en fer ou aciers non-alliés, enroulés en couronnes irrégulières, avec indentations, bourrelets, creux ou reliefs obtenus lors du laminage: Autres armes (fusils, carabines et pistolets à ressort, à air comprimé ou à gaz, matraques, par exemple), à l'exclusion de celles du n° 93.07: Autres: De section circulaire d’un diamètre égal ou inférieur à 6 mm

Dominica HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Of iron

Fiji HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of a circular cross- section measuring not less than 10 mm but not more than 32 mm in diameter

Grenada HS Code

HS Code 72131010 Containing indentations, ribs, grooves or other deformations produced during the rolling process: Of iron

Guyana HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Of iron

India HS Code

HS Code 72131010 BARS AND RODS HT-RLD,CONTNG INDNTATIONS RIBS,GROOVES/OTHR DEFRMTN PRDCTS OF FREE CUTTING STEEL

Indonesia HS Code

HS Code 72131010 Of circular cross-section measuring not exceeding 50 mm in diameter

Iran (Islamic Republic of) HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Rods of a diameter of less than 9 mm wound in coils

Jamaica HS Code

HS Code 7213101010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Of iron: Bars of iron

Lao, People's Democratic Republic HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : of circular cross-section measuring not exceeding 50 mm in diameter

Liechtenstein HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: containing indentations, ribs, grooves or other deformations produced during the rolling process: not pickled

Malawi HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section not exceeding6mm in diameter

Malaysia HS Code

HS Code 7213101000 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL.CONTAINING INDENTATIONS, RIBS, GROOVES OR OTHER DEFORMATIONS PRODUCED DURING THE ROLLING PROCESS:OF CIRCULAR CROSS-SECTION MEASURING NOT EXCEEDING 50 MM IN DIAMETER

Mauritius HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section not exceeding 6 mm in diameter

Montserrat HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process:Of iron

Morocco HS Code

HS Code 7213101000 Fil machine en fer ou en aciers non alliés: Comportant des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage: de section transversale en forme de cercle aplati ou de rectangle modifié

Myanmar HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section measuring not exceeding 50mm in diameter

New Zealand HS Code

HS Code 72131010 "Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of cross-section in the shape of ""flattened circles"" or ""modified rectangles"""

Norway HS Code

HS Code 72131010 Subgroup of: 721310 Bars and rods of iron or non-alloy steel, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced

Pakistan HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of secondary quality

Philippines HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Containing indentations, ribs, grooves or other deformations produced during the rolling process: Of circular cross-section measuring not exceeding 50 mm in diameter

Saint Kitts and Nevis HS Code

HS Code 7213101000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Of iron

Saint Lucia HS Code

HS Code 72131010000 Containing indentations, ribs, grooves or other deformations produced during the rolling process: Of iron

Saint Vincent and the Grenadines HS Code

HS Code 72131010000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: of iron

Singapore HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section measuring not exceeding 50 mm in diameter

Sri Lanka HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process: Flattened circles and modified rectangles

Sudan HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of circular cross-section not exceeding 6 mm in diameter

Suriname HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of iron

Switzerland HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: containing indentations, ribs, grooves or other deformations produced during the rolling process: not pickled

Thailand HS Code

HS Code 72131010010 Containing by weight not more than 0.08% of carbon

Trinidad and Tobago HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process : Of iron

Viet Nam HS Code

HS Code 72131010 Of circular cross-section measuring not exceeding 50 mm in diameter

Yemen HS Code

HS Code 72131010 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non- alloy steel : Containing indentations, ribs, grooves or other deformations produced during the rolling process : For industry

HS Code 72131010: Ribbed Rebar Coils

HS Code 72131010 Description by Country

Frequently Asked Questions