What is HS code 72122010?

HS code 72122010 is an 8-digit code for Electrogalvanised Narrow Strip, under the 6-digit subheading 721220 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72122010 the same in every country?

Up to 6 digits (721220) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72122010?

72122010 is listed across 49 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72122010 Electrogalvanised Narrow Strip by Country

Algeria HS Code

HS Code 7212201000 Produits laminés plats, en fer ou en aciers non alliés, d'une largeur < 600 mm, laminés à chaud ou à froid, zingués électrolytiquement : D'une épaisseur inférieure à 3 mm

Angola HS Code

HS Code 72122010 Produtos laminados planos, de ferro ou aço não ligado, de largura inferior a 600 mm, folheados ou chapeados, ou revestidos: Galvanizados electroliticamente : Em rolos

Anguilla HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Of a thickness of less than 3 mm, corrugated"

Antigua and Barbuda HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled cold-reduced"", electrolytically plated or coated with zinc"": Electrolytically plated or coated with zinc of thickness of less than 3mm corrugated"

Argentina HS Code

HS Code 72122010 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm chapados o revestidos: Cincados electrolíticamente: De espesor inferior a 4.75 mm

Bangladesh HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Electorlytically plated or coated.. imp by vat reg.refri and air cond manu. indus."

Barbados HS Code

HS Code 72122010000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Flat-roll. prod. of iron etc,< 600mm wide, < 3mm, elect. plated/coated with zinc, corrugated"

Belize HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Of a thickness of less than 3 mm, corrugated"

Brazil HS Code

HS Code 72122010 Of a thickness of less than 4.75 mm

Brunei Darussalam HS Code

HS Code 7212201000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated: Electrolytically plated or coated with zinc : Hoop and strip, of a width not exceeding 400 mm

Cambodia HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Hoop and strip, of a width not exceeding 400 mm"

Canada HS Code

HS Code 7212201000 Flat roll prod,steel,electrol pltd/ctd/zinc, =3mm thk,myp 3

Comoros HS Code

HS Code 72122010 Produits laminés plats, en fer ou en aciers non alliés, d'une largeur < 600 mm, laminés à chaud ou à froid, zingués électrolytiquement: Enroulés

Cook Islands HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Roofing sheets"

Djibouti HS Code

HS Code 72122010 Produits laminés plats, en fer ou en aciers non-alliés, d'une largeur < 600 mm, laminés à chaud ou à froid, zingués électrolytiquement: Autres armes (fusils, carabines et pistolets à ressort, à air comprimé ou à gaz, matraques, par exemple), à l'exclusion de celles du n° 93.07: Autres: Enroulés

Dominica HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated"

Fiji HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Roofing sheets"

Grenada HS Code

HS Code 72122010 Electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated

Guyana HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated"

India HS Code

HS Code 72122010 CORRUGATED FLT-RLD PRDCTS OF IRON/NON ALOY STL OF WIDTH < 600MM ELECTCLY PLATED /COTD WTH ZINC

Indonesia HS Code

HS Code 72122010 Hoop and strip, of a width not exceeding 400 mm

Jamaica HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated"

Korea, Republic of HS Code

HS Code 7212201000 Of a tensile strength of 340 MPa or more

Lao, People's Democratic Republic HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Hoop and strip, of a width not exceeding 400 mm"

Malawi HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : In coils"

Malaysia HS Code

HS Code 7212201000 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED.ELECTROLYTICALLY PLATED OR COATED WITH ZINC:HOOP AND STRIP, OF A WIDTH NOT EXCEEDING 400 MM

Maldives HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm (electrolytically plated or coated with zinc) (roofing sheet)"

Micronesia (Federated States of) HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Roofing sheets"

Montserrat HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled cold-reduced"", electrolytically plated or coated with zinc"":Of a thickness of less than 3 mm, corrugated"

Myanmar HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Hoop and strip, of a width not exceeding 400 Mm"

New Zealand HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Not exceeding 500 mm in width"

Pakistan HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Of secondary quality"

Panama HS Code

HS Code 72122010 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, chapados o revestidos: Cincados electrolíticamente: Flejes o zunchos

Paraguay HS Code

HS Code 72122010 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm chapados o revestidos: Cincados electrolíticamente: De espesor inferior a 4.75 mm

Philippines HS Code

HS Code 72122010 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated: Electrolytically plated or coated with zinc: Hoop and strip, of a width not exceeding 400 mm

Saint Kitts and Nevis HS Code

HS Code 7212201000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated"

Saint Lucia HS Code

HS Code 72122010000 Electrolytically plated or coated with zinc: Of a thickness of less than 3 mm, corrugated

Saint Vincent and the Grenadines HS Code

HS Code 72122010000 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled cold-reduced"", electrolytically plated or coated with zinc"": of a thickness of less than 3mm, corrugated"

Singapore HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Hoop and strip, of a width not exceeding 400 mm"

Solomon Islands HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : Roofing sheets"

Sri Lanka HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc: Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 Mpa"

Sudan HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ""cold-reduced"", electrolytically plated or coated with zinc : In coils"

Suriname HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled cold-reduced"", electrolytically plated or coated with zinc"" : Of a thickness of less than 3 mm, corrugated"

Thailand HS Code

HS Code 72122010011 Of zinc coating weight 35 g/m2 or more / one surface

Trinidad and Tobago HS Code

HS Code 72122010 "Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled cold-reduced"", electrolytically plated or coated with zinc"" : Of a thickness of less than 3 mm, corrugated"

Uruguay HS Code

HS Code 7212201000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm chapados o revestidos: Cincados electrolíticamente: De espesor inferior a 4.75 mm

Venezuela (Bolivarian Republic of) HS Code

HS Code 7212201000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm chapados o revestidos: Cincados electrolíticamente: De espesor inferior a 4.75 mm

Viet Nam HS Code

HS Code 72122010 Hoop and strip, of a width not exceeding 400 mm

Yemen HS Code

HS Code 72122010 Flat-rolled products of iron or non- alloy steel, of a width of less than 600 mm, clad, plated or coated : Electrolytically plated or coated with zinc : For industry

HS Code 72122010: Electrogalvanised Narrow Strip

HS Code 72122010 Description by Country

Frequently Asked Questions