HS Code 72111300: Wide Hot-Rolled Steel Strip
HS code 72111300 is an 8-digit code for Wide Hot-Rolled Steel Strip, under the 6-digit subheading 721113. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 72111300HS Code 72111300 Description by Country
72111300 is listed across 173 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Afghanistan HS Code
HS Code 72111300 Not further worked than hot-rolled : Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Albania HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Angola HS Code
HS Code 72111300 Produtos laminados planos, de ferro ou aço não ligado, de largura inferior a 600 mm, não folheados ou chapeados, nem revestidos: Simplesmente laminados a quente: Laminados nas quatro faces ou em caixa fechada, de largura superior a 150 mm e de espessura igual ou superior a 4 mm, não enrolados e não apresentando motivos em relevo
Anguilla HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Antigua and Barbuda HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as wide flats"""
Argentina HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Armenia HS Code
HS Code 7211130000 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Aruba HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Australia HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Austria HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Azerbaijan HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Bahamas HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Bangladesh HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Barbados HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Belarus HS Code
HS Code 7211130000 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Belgium HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Belize HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Benin HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Bhutan HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Bolivia (Plurinational State of) HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Bosnia and Herzegovina HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Botswana HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Brazil HS Code
HS Code 72111300 Rolled on all four faces or in a closed box, of a width exceeding 150 mm and a thickness of 4 mm or more, not in coils and without patterns in relief
Bulgaria HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Burkina Faso HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Burundi HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Cameroon HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Canada HS Code
HS Code 7211130000 Flat rolled prod, i/nas, hr,rolled on 4 faces,width > 150mm =
Cayman Islands HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"" ""ECSC"":"
Central African Republic HS Code
HS Code 72111300 Produits laminés plats, en fer ou en aciers non alliés, d’une largeur inférieure à 600 mm, non plaqués ni revêtus: Simplement laminés à chaud : Laminés sur les quatre faces ou en cannelures fermées, d’une largeur excédant 150 mm et d’une épaisseur de 4 mm ou plus, non enroulés et ne présentant pas de motifs en relief
Chad HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non-alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, épaisseur >= 4 mm, non-enroulés, sans motifs en relief, en acier dit large plat"" ou ""acier universel"""
Chile HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Colombia HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Comoros HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, d'une épaisseur >= 4 mm, non enroulés, sans motifs en relief, en acier dit ""large plat"" ou ""acier universel"""
Congo HS Code
HS Code 72111300 Produits laminés plats, en fer ou en aciers non alliés, d'une largeur inférieure à 600 mm, non plaqués ni revêtus: simplement laminés à chaud: laminés sur les quatre faces ou en cannelures fermées, d'une largeur excédant 150 mm et d'une épaisseur de 4 mm ou plus, non enroulés et ne présentant pas de motifs en relief
Congo, Democratic Republic of HS Code
HS Code 7211130000 "Produits laminés plats, en fer ou en aciers non alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, d'une épaisseur >= 4 mm, non enroulés, sans motifs en relief, en acier dit ""large plat"" ou ""acier universel"""
Cook Islands HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Costa Rica HS Code
HS Code 721113000000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir : Simplemente laminados en caliente : Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Côte d'Ivoire HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Croatia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Cuba HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Cyprus HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Czech Republic HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Denmark HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Djibouti HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non-alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, épaisseur >= 4 mm, non-enroulés, sans motifs en relief, en acier dit large plat"" ou ""acier universel"""
Dominica HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Dominican Republic HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Ecuador HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Egypt HS Code
HS Code 7211130000 Flat-rolled products hot rolled on four faces or in a closed box pass, of a width exceeding 150mm but less than 600 mm and of a thickness of not less than 4mm, not in coils and without patterns in relief.
El Salvador HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir : Simplemente laminados en caliente : Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Equatorial Guinea HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non-alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, épaisseur >= 4 mm, non-enroulés, sans motifs en relief, en acier dit large plat"" ou ""acier universel"""
Estonia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Eswatini HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Ethiopia HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Fiji HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Finland HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
France HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Gabon HS Code
HS Code 72111300 Prodts.lam.plats a chaud en fe,acier n.a.n.enrou.l>150mm < 600mm d'ep>=4mm
Gambia HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Georgia HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"" : Rolled on four faces or in a closed box pass, of a width exceeding 150 mm anda thickness of not less than 4 mm, not in coils and without patterns in relief"
Germany HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Ghana HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Gibraltar HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Greece HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Grenada HS Code
HS Code 72111300 Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Guatemala HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir : Simplemente laminados en caliente : Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Guinea HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Guinea-Bissau HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Guyana HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Haiti HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, d'une épaisseur >= 4 mm, non enroulés, sans motifs en relief, en acier dit ""large plat"" ou ""acier universel"""
Honduras HS Code
HS Code 721113000000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Hong Kong, China Special Administrative Region HS Code
HS Code 72111300 UNIVERSAL MILL PLATE OF IRON OR NON-ALLOY STEEL, UNDER 600 MM WIDE, NOT FURTHER WORKED THAN HOT-ROLLED, NOT CLAD, PLATED OR COATED
Hungary HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Iceland HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, of a width of > 150 mm but < 600 mm, and of a thickness of >= 4 mm uncoated, hot-rolled on four faces, not in coils and without patterns
India HS Code
HS Code 72111300 FLT-ROLD PRDCTS NT FRTHR WRKD THN HT-ROLD ROLD ON FOUR FACES OF WDTH >150MM AND THCNS >=4MM NT IN COILS AND WTHOUT PTRN
Iran (Islamic Republic of) HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Ireland HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Israel HS Code
HS Code 72111300 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Italy HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Jamaica HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Japan HS Code
HS Code 721113000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated > -- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of 4 mm or more, not in coils and without patterns in relief
Jordan HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Kazakhstan HS Code
HS Code 7211130000 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Kenya HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Korea, Republic of HS Code
HS Code 7211130000 Rolled on four faces or in a closed box pass (only of a width exceeding 150 mm and a thickness of 4 mm or more, excluding those in coils and those with patterns in relief)
Kosovo HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Kuwait HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Kyrgyzstan HS Code
HS Code 7211130000 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Latvia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Lebanon HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Lesotho HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Liberia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Libya HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Lithuania HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Luxembourg HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Macao, China Special Administrative Region HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not further worked other than hot-rolled, not clad, plated or coated, rolled on four faces or in a closed box pass, of a width exceeding 150 mm but less than 600 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Madagascar HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, d'une épaisseur >= 4 mm, non enroulés, sans motifs en relief, en acier dit ""large plat"" ou ""acier universel"""
Malawi HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Maldives HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Mali HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Malta HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Mauritius HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Mayotte HS Code
HS Code 72111300 Produits laminés plats, en fer ou en aciers non alliés, d'une largeur inférieure à 600 mm, non plaqués ni revêtus: simplement laminés à chaud: laminés sur les quatre faces ou en cannelures fermées, d'une largeur excédant 150 mm et d'une épaisseur de 4 mm ou plus, non enroulés et ne présentant pas de motifs en relief
Micronesia (Federated States of) HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Moldova, Republic of HS Code
HS Code 721113000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Mongolia HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Montenegro HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Montserrat HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as wide flats"""
Morocco HS Code
HS Code 7211130010 Produits laminés plats, en fer ou en aciers non alliés, d’une largeur inférieure à 600 mm, non plaqués ni revêtus: Simplement laminés à chaud: Laminés sur les quatre faces ou en cannelures fermées, d’une largeur excédant 150 mm et d’une épaisseur de 4 mm ou plus, non enroulés et ne présentant pas de motifs en relief: en acier contenant en poids 0, 6 % ou plus de carbone, à condition que la teneur en soufre et en phosphore soit inférieure en poids à 0, 04 % pour chacun de ces éléments pris isolément et à 0, 07 % pour ces deux éléments pris ensemble
Mozambique HS Code
HS Code 72111300 Produtos laminados planos, de ferro ou aço não ligado, de largura inferior a 600 mm, não folheados ou chapeados, nem revestidos: Simplesmente laminados a quente: Laminados nas quatro faces ou em caixa fechada, de largura superior a 150 mm e de espessura igual ou superior a 4 mm, não enrolados e não apresentando motivos em relevo
Namibia HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Nauru HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Nepal HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Netherlands HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
New Zealand HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Nicaragua HS Code
HS Code 721113000000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir : Simplemente laminados en caliente : Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Niger HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Nigeria HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
North Macedonia, Republic of HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Norway HS Code
HS Code 72111300 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of >
Oman HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Palestine, State of HS Code
HS Code 72111300 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Panama HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas, de anchura superior a 150 mm y espesor superior o igual a 4 mm, sin enrollar y sin motivos en relieve
Papua New Guinea HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Paraguay HS Code
HS Code 72111300 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Peru HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Poland HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Portugal HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Qatar HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Romania HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Russian Federation HS Code
HS Code 7211130000 Not further worked than hotrolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Rwanda HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Saint Kitts and Nevis HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Saint Lucia HS Code
HS Code 72111300000 Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Saint Pierre and Miquelon HS Code
HS Code 72111300 "Produits laminés plats, en fer ou en aciers non alliés, simpl. laminés à chaud sur les quatre faces ou en cannelures fermées, d'une largeur > 150 mm mais < 600 mm, d'une épaisseur >= 4 mm, non enroulés, sans motifs en relief, en acier dit ""large plat"" ou ""acier universel"""
Saint Vincent and the Grenadines HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as wide flats"""
Samoa HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Sao Tome and Principe HS Code
HS Code 72111300 Produtos laminados planos, de ferro ou aço não ligado, de largura inferior a 600 mm, não folheados ou chapeados, nem revestidos: Simplesmente laminados a quente: Laminados nas quatro faces ou em caixa fechada, de largura superior a 150 mm e de espessura igual ou superior a 4 mm, não enrolados e não apresentando motivos em relevo
Saudi Arabia HS Code
HS Code 721113000001 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"" : Description not available beyond the 8-digit level"
Senegal HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Serbia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Seychelles HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Sierra Leone HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Slovakia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Slovenia HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Solomon Islands HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
South Africa HS Code
HS Code 72111300 Rolled On Four Faces Or In A Closed Box Pass, Of A Width Exceeding 150 Mm And A Thickness Of Not Less Than 4 Mm, Not In Coils And Without Patterns In Relief
Spain HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Sri Lanka HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Sudan HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Suriname HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as wide flats"""
Sweden HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Syrian Arab Republic HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Tajikistan HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Tanzania, United Republic of HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Timor-Leste HS Code
HS Code 721113000000 Produtos laminados planos, de ferro ou aço não ligado, de largura inferior a 600 mm, não folheados ou chapeados, nem revestidos.: Simplesmente laminados a quente: Laminados nas quatro faces ou em caixa fechada, de largura superior a 150 mm e de espessura igual ou superior a 4 mm, não enrolados e não apresentando motivos em relevo
Togo HS Code
HS Code 7211130000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Tonga HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Trinidad and Tobago HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as wide flats"""
Tunisia HS Code
HS Code 72111300005 Produits en fer ou en aciers non allies,non plaques ni revetus,simplement lamines plats a chaud sur les quatre facesou en cannelures fermeesd'une larg >150mm mais <600mm et d'une epaisseur de 4mm ou plus,non enroules
Turkey HS Code
HS Code 721113001100 Hot rolled wide sheets of iron/non-alloy steel; carbon >= 0.6%, 150mm 4mm, uncoated
Tuvalu HS Code
HS Code 72111300 Flat-rolled products of iron or un-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Uganda HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Ukraine HS Code
HS Code 7211130000 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
United Arab Emirates HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
United Kingdom HS Code
HS Code 7211130011 Of a width not exceeding 350 mm and of a thickness of 50 mm or more
United States of America HS Code
HS Code 7211130000 Universal mill plate
Uruguay HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Uzbekistan HS Code
HS Code 7211130000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Vanuatu HS Code
HS Code 72111300000 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Venezuela (Bolivarian Republic of) HS Code
HS Code 7211130000 Productos laminados planos de hierro o acero sin alear de anchura inferior a 600 mm sin chapar ni revestir: Simplemente laminados en caliente: Laminados en las cuatro caras o en acanaladuras cerradas de anchura superior a 150 mm y espesor superior o igual a 4 mm sin enrollar y sin motivos en relieve
Zambia HS Code
HS Code 72111300 "Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ""wide flats"""
Zimbabwe HS Code
HS Code 72111300 not further worked than hot-rolled: rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
Frequently Asked Questions
What is HS code 72111300?
HS code 72111300 is an 8-digit code for Wide Hot-Rolled Steel Strip, under the 6-digit subheading 721113 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 72111300 the same in every country?
Which countries use HS code 72111300?