HS Code 7208521000: Standard Hot-Rolled Steel Plate
HS code 7208521000 is an 10-digit code for Standard Hot-Rolled Steel Plate, under the 6-digit subheading 720852. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 7208521000HS Code 7208521000 Description by Country
7208521000 is listed across 50 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Albania HS Code
HS Code 72085210000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Algeria HS Code
HS Code 7208521000 Produits laminés plats, en fer ou en acier non alliés, d'une largeur >= 600 mm, non enroulés, simpl. laminés à chaud, non plaqués ni revêtus, épaisseur >= 4,75 mm mais <= 10 mm (sans motifs en relief) : Laminés sur les quatre faces ou en cannelures fermées d'une largeurn'excédant pas 1.250 mm
Armenia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Austria HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Azerbaijan HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief : rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
Belarus HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Belgium HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Bolivia (Plurinational State of) HS Code
HS Code 7208521000 Productos laminados planos de hierro o acero sin alear de anchura superior o igual a 600 mm laminados en caliente sin chapar ni revestir: Los demás sin enrollar simplemente laminados en caliente: De espesor superior o igual a 4.75 mm pero inferior o igual a 10 mm: Con un contenido de carbono superior o igual a 0.6 % en peso
Bosnia and Herzegovina HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief : Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
Bulgaria HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Canada HS Code
HS Code 7208521000 Flat prod, roll 4 faces,i/nas,nic,hr,>=4.75mm thk,>=600<=1,250mm wide,myp 35
Colombia HS Code
HS Code 7208521000 Productos laminados planos de hierro o acero sin alear de anchura superior o igual a 600 mm laminados en caliente sin chapar ni revestir: Los demás sin enrollar simplemente laminados en caliente: De espesor superior o igual a 4.75 mm pero inferior o igual a 10 mm: Con un contenido de carbono superior o igual a 0.6 % en peso
Croatia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Cyprus HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Czech Republic HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Denmark HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Estonia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Finland HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
France HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Georgia HS Code
HS Code 72085210000 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief : Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
Germany HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Greece HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Hungary HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Ireland HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Italy HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Kazakhstan HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Korea, Republic of HS Code
HS Code 7208521000 Of a tensile strength of 490 MPa or more
Kosovo HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief : Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
Kyrgyzstan HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Latvia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Lithuania HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Luxembourg HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Malta HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Montenegro HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Netherlands HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
North Macedonia, Republic of HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Peru HS Code
HS Code 7208521000 Productos laminados planos de hierro o acero sin alear de anchura superior o igual a 600 mm laminados en caliente sin chapar ni revestir: Los demás sin enrollar simplemente laminados en caliente: De espesor superior o igual a 4.75 mm pero inferior o igual a 10 mm: Con un contenido de carbono superior o igual a 0.6 % en peso
Poland HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Portugal HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Romania HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Russian Federation HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Serbia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Slovakia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Slovenia HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Spain HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Sweden HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of <= 1.250 mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief
Tajikistan HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, not in coils, not further worked than hot-rolled: Of a thickness of 4,75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Ukraine HS Code
HS Code 7208521000 Not in coils, not further worked than hot-rolled, with patterns in relief: Of a thickness of 4, 75 mm or more but not exceeding 10 mm: Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
United Kingdom HS Code
HS Code 7208521000 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
Uzbekistan HS Code
HS Code 7208521000 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief : Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm
Frequently Asked Questions
What is HS code 7208521000?
HS code 7208521000 is an 10-digit code for Standard Hot-Rolled Steel Plate, under the 6-digit subheading 720852 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 7208521000 the same in every country?
Which countries use HS code 7208521000?