What is HS code 72071100?

HS code 72071100 is an 8-digit code for Low-Carbon Square Steel Billets, under the 6-digit subheading 720711 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 72071100 the same in every country?

Up to 6 digits (720711) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 72071100?

72071100 is listed across 114 countries' HS schedules in the table above, each with its national code and local description.

HS Code 72071100 Low-Carbon Square Steel Billets by Country

Afghanistan HS Code

HS Code 72071100 Containing by weight less than 0.25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Angola HS Code

HS Code 72071100 Produtos semimanufacturados de ferro ou aço não ligado: Que contenham, em peso, menos de 0,25 % de carbono: De secção transversal quadrada ou rectangular, com largura inferior a duas vezes a espessura

Aruba HS Code

HS Code 72071100 Containing by weight less than 0,25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Australia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Bahamas HS Code

HS Code 72071100 Containing by weight less than 0,25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Bahrain HS Code

HS Code 72071100 SEMI-FINISHED IRON AND STEEL, UNDER 0.25 PERCENT CARBON, RECT.

Bangladesh HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Benin HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Bhutan HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Bolivia (Plurinational State of) HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25 % en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Botswana HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Brunei Darussalam HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Burkina Faso HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Burundi HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Cambodia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Cameroon HS Code

HS Code 72071100000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Canada HS Code

HS Code 7207110010 Semi-finished prod of iron,rect/square cross-section,cont by wt <0.25% carbo

Cayman Islands HS Code

HS Code 72071100 containing, by weight, < 0,25% of carbon, of rectangular or square cross-section, the width measuring < twice the thickness:

Central African Republic HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés: Contenant en poids moins de 0,25 % de carbone : De section transversale carrée ou rectan-gulaire et dont la largeur est inférieure à deux fois l’épaisseur

Chad HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non-alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Chile HS Code

HS Code 72071100 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25 % en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Colombia HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25 % en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Comoros HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Congo HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés: contenant en poids moins de 0,25 % de carbone: de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Congo, Democratic Republic of HS Code

HS Code 7207110000 Demi-produits en fer ou en aciers non alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Cook Islands HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Costa Rica HS Code

HS Code 720711000000 Productos intermedios de hierro o acero sin alear : Con un contenido de carbono inferior al 0,25 % en peso : De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Côte d'Ivoire HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Cuba HS Code

HS Code 72071100 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25 % en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Djibouti HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non-alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Ecuador HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25% en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Egypt HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, Of rectangular or square cross-section, the width measuring less than twice the thickness.

El Salvador HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear : Con un contenido de carbono inferior al 0,25 % en peso : De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Equatorial Guinea HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non-alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Eswatini HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Ethiopia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Fiji HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Gabon HS Code

HS Code 72071100 Demi-prod.en fe ou aciers n.a.,- de 0,25 % de carb.de sect.t carre ou rect

Gambia HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Ghana HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Guatemala HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear : Con un contenido de carbono inferior al 0,25 % en peso : De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Guinea HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Guinea-Bissau HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Haiti HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Honduras HS Code

HS Code 720711000000 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25% en peso: De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Hong Kong, China Special Administrative Region HS Code

HS Code 72071100 SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL, UNDER 0.25% (WT.) CARBON, RECTANGULAR OR SQUARE CROSS SECTION, WIDTH LESS THAN TWICE THE THICKNESS

Iceland HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing < 0.25% carbon, of rectangular (including square) cross-section, the width measuring less than twice the thickness

Indonesia HS Code

HS Code 72071100 Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Israel HS Code

HS Code 72071100 Containing by weight less than 0,25 % of carbon: Of rectangular (including square) crosssection, the width measuring less than twice the thickness

Japan HS Code

HS Code 720711000 Semi-finished products of iron or non-alloy steel > Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Jordan HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Kenya HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Kuwait HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Lao, People's Democratic Republic HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Lebanon HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Lesotho HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Liberia HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Libya HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Liechtenstein HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel: containing by weight less than 0.25% of carbon: of rectangular (including square) cross-section, the width measuring less than twice the thickness

Macao, China Special Administrative Region HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25 % of carbon, of rectangular (including square) cross-section, the width measuring less than twice the thickness

Madagascar HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Malawi HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Malaysia HS Code

HS Code 7207110000 SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL.CONTAINING BY WEIGHT LESS THAN 0.25% OF CARBON:OF RECTANGULAR (INCLUDING SQUARE) CROSS-SECTION, THE WIDTH MEASURING LESS THAN TWICE THE THICKNESS

Maldives HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Mali HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Mauritius HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Micronesia (Federated States of) HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Mongolia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25% of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Morocco HS Code

HS Code 7207110011 Demi-produits en fer ou en aciers non alliés: Contenant en poids moins de 0, 25% de carbone: De section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l’épaisseur: de section carrée supérieure à 1.225 mm²: laminés

Mozambique HS Code

HS Code 72071100 Produtos semimanufacturados de ferro ou aço não ligado: Que contenham, em peso, menos de 0,25 % de carbono: De secção transversal quadrada ou retangular, com largura inferior a duas vezes a espessura

Myanmar HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Namibia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Nauru HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Nepal HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

New Zealand HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Nicaragua HS Code

HS Code 720711000000 Productos intermedios de hierro o acero sin alear : Con un contenido de carbono inferior al 0,25 % en peso : De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Niger HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Nigeria HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Norway HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measurin

Oman HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Palestine, State of HS Code

HS Code 72071100 Containing by weight less than 0,25 % of carbon: Of rectangular (including square) crosssection, the width measuring less than twice the thickness

Panama HS Code

HS Code 72071100 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0,25 % en peso: De sección transversal cuadrada o rectangular, cuya anchura sea inferior al doble del espesor

Papua New Guinea HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Peru HS Code

HS Code 7207110000 Productos intermedios de hierro o acero sin alear: Con un contenido de carbono inferior al 0.25 % en peso: De sección transversal cuadrada o rectangular cuya anchura sea inferior al doble del espesor

Philippines HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25% of carbon: Of rectangular (including square) cross section, the width measuring less than twice the thickness

Qatar HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Rwanda HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Saint Pierre and Miquelon HS Code

HS Code 72071100 Demi-produits en fer ou en aciers non alliés, contenant en poids < 0,25% de carbone, de section transversale carrée ou rectangulaire et dont la largeur est inférieure à deux fois l'épaisseur

Samoa HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Sao Tome and Principe HS Code

HS Code 72071100 Produtos semimanufacturados de ferro ou aço não ligado: Que contenham, em peso, menos de 0,25 % de carbono: De secção transversal quadrada ou retangular, com largura inferior a duas vezes a espessura

Saudi Arabia HS Code

HS Code 720711000001 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness : Description not available beyond the 8-digit level

Senegal HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Seychelles HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Sierra Leone HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Singapore HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Solomon Islands HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

South Africa HS Code

HS Code 72071100 Of Rectangular (Including Square) Cross-Section, The Width Measuring Less Than Twice The Thickness

Sudan HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Switzerland HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel: containing by weight less than 0.25% of carbon: of rectangular (including square) cross-section, the width measuring less than twice the thickness

Syrian Arab Republic HS Code

HS Code 72071100 containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Taipei, Chinese HS Code

HS Code 72071100004 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section,the width measuring less than twice the thickness

Tanzania, United Republic of HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Thailand HS Code

HS Code 72071100010 Containing by weight not more than 0.08% of carbon

Timor-Leste HS Code

HS Code 720711000000 Produtos semimanufaturados de ferro ou aço não ligado.: Que contenham, em peso, menos de 0,25 % de carbono: De secção transversal quadrada ou retangular, com largura inferior a duas vezes a espessura

Togo HS Code

HS Code 7207110000 Semi-finished products of iron or non-alloy steel: Containing by weight less than 0.25 % of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Tonga HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Tuvalu HS Code

HS Code 72071100 Semi-finished products of iron or un-alloy steel: Containing by weight less than 0.25% of carbon: Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Uganda HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

United Arab Emirates HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

United States of America HS Code

HS Code 7207110000 Of rectangular (including square) cross section, the width measuring less than twice the thickness

Vanuatu HS Code

HS Code 72071100000 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Viet Nam HS Code

HS Code 72071100 Of rectangular (including square) cross-section, the width measuring less than twice the thickness

Zambia HS Code

HS Code 72071100 Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square or rectangular cross-section, the width measuring < twice the thickness

Zimbabwe HS Code

HS Code 72071100 containing by weight less than 0.25% of carbon: of rectangular (including square) cross- section, the width measuring less than twice the thickness

HS Code 72071100: Low-Carbon Square Steel Billets

HS Code 72071100 Description by Country

Frequently Asked Questions