What is HS code 4408101000?

HS code 4408101000 is an 10-digit code for Coniferous Veneer Sheets, under the 6-digit subheading 440810 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.

Is HS code 4408101000 the same in every country?

Up to 6 digits (440810) it is the same in every country that applies the Harmonized System. Beyond that, countries extend it with their own subdivisions and descriptions, as the table above shows.

Which countries use HS code 4408101000?

4408101000 is listed across 24 countries' HS schedules in the table above, each with its national code and local description.

HS Code 4408101000 Coniferous Veneer Sheets by Country

Algeria HS Code

HS Code 4408101000 Feuilles pour placage (y.c. celles obtenues par tranchage de bois stratifié), feuilles pour contre-plaqués ou pour autres bois stratifiés simil. en bois de conifères et autres bois de conifères, sciés longitudinalement, tranchés ou déroulés, même rabotés, poncés, assemblés bord à bord ou en bout, d'une épaisseur <= 6 mm : Feuilles de placage

Antigua and Barbuda HS Code

HS Code 4408101000 Veneer sheets and sheets for plywood

Barbados HS Code

HS Code 44081010000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Veneer sheets and sheets for coniferous plywood, <= 6mm thick

Belize HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm : Veneer sheets and sheets for plywood

Bolivia (Plurinational State of) HS Code

HS Code 4408101000 Hojas para chapado (incluidas las obtenidas por cortado de madera estratificada) para contrachapado o para maderas estratificadas similares y demás maderas aserradas longitudinalmente cortadas o desenrolladas incluso cepilladas lijadas unidas longitudinalmente o por los extremos de espesor inferior o igual a 6 mm: De coníferas: Tablillas para fabricación de lápices

Brunei Darussalam HS Code

HS Code 4408101000 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Coniferous : Cedar wood pencil slats; Radiata pinewood of a kind used for blockboard manufacture

Canada HS Code

HS Code 4408101000 Sheets f veneering,of coniferous,obtained by slicing laminated wood,thick <=

Colombia HS Code

HS Code 4408101000 Hojas para chapado (incluidas las obtenidas por cortado de madera estratificada) para contrachapado o para maderas estratificadas similares y demás maderas aserradas longitudinalmente cortadas o desenrolladas incluso cepilladas lijadas unidas longitudinalmente o por los extremos de espesor inferior o igual a 6 mm: De coníferas: Tablillas para fabricación de lápices

Congo, Democratic Republic of HS Code

HS Code 4408101000 Feuilles pour placage (y.c. celles obtenues par tranchage de bois stratifié), feuilles pour contre-plaqués ou pour autres bois stratifiés simil. en bois de conifères et autres bois de conifères, sciés longitudinalement, tranchés ou déroulés, même rabotés, poncés, assemblés bord à bord ou en bout, d'une épaisseur <= 6 mm: Feuilles de placage...de coniferes,scies ou dedosses long.,tranches,deroul

Dominica HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Veneer sheets and sheets for plywood

Ecuador HS Code

HS Code 4408101000 Hojas para chapado (incluidas las obtenidas por cortado de madera estratificada) para contrachapado o para maderas estratificadas similares y demás maderas aserradas longitudinalmente cortadas o desenrolladas incluso cepilladas lijadas unidas longitudinalmente o por los extremos de espesor inferior o igual a 6 mm: De coníferas: Tablillas para fabricación de lápices

Guyana HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Veneer sheets and sheets for plywood

Jamaica HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Veneer sheets and sheets for plywood

Lao, People's Democratic Republic HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm : Cedar wood pencil slats; Radiata pinewood of a kind used for blockboard manufacture

Malaysia HS Code

HS Code 4408101000 SHEETS FOR VENEERING (INCLUDING THOSE OBTAINED BY SLICING LAMINATED WOOD), FOR PLYWOOD OR FOR SIMILAR LAMINATED WOOD AND OTHER WOOD, SAWN LENGTHWISE, SLICED OR PEELED, WHETHER OR NOT PLANED, SANDED, SPLICED OR END-JOINTED, OF A THICKNESS NOT EXCEEDING 6 MCONIFEROUS:CEDAR WOOD PENCIL SLATS; RADIATA PINEWOOD OF A KIND USED FOR BLOCKBOARD MANUFACTURE

Morocco HS Code

HS Code 4408101000 Feuilles pour placage (y compris celles obtenues par tranchage de bois stratifié), feuilles pour contre-plaqués ou pour bois stratifiés similaires et autres bois, sciés longitudinalement, tranchés ou déroulés, même rabotés, poncés, assemblés bord à bord o: De conifères: feuilles pour placage obtenues par tranchage de bois stratifié

Myanmar HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm : Cedar wood pencil slats; Radiata pinewood of a kind used for blockboard manufacture

Peru HS Code

HS Code 4408101000 Hojas para chapado (incluidas las obtenidas por cortado de madera estratificada) para contrachapado o para maderas estratificadas similares y demás maderas aserradas longitudinalmente cortadas o desenrolladas incluso cepilladas lijadas unidas longitudinalmente o por los extremos de espesor inferior o igual a 6 mm: De coníferas: Tablillas para fabricación de lápices

Saint Kitts and Nevis HS Code

HS Code 4408101000 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Veneer sheets and sheets for plywood

Saint Lucia HS Code

HS Code 44081010000 Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Coniferous: Veneer sheets and sheets for plywood

Saint Vincent and the Grenadines HS Code

HS Code 44081010000 veneer sheets and sheets for plywood

Saudi Arabia HS Code

HS Code 440810100001 Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm: Planed : Description not available beyond the 8-digit level

Thailand HS Code

HS Code 44081010000 Cedar wood pencil slats; Radiata pinewood of a kind used for blockboard manufacture

Uruguay HS Code

HS Code 4408101000 Hojas para chapado (incluidas las obtenidas por cortado de madera estratificada) para contrachapado o para maderas estratificadas similares y demás maderas aserradas longitudinalmente cortadas o desenrolladas incluso cepilladas lijadas unidas longitudinalmente o por los extremos de espesor inferior o igual a 6 mm: De coníferas: Obtenidas por cortado de madera estratificada

HS Code 4408101000: Coniferous Veneer Sheets

HS Code 4408101000 Description by Country

Frequently Asked Questions