HS Code 3920992848: Other Plastic Sheets and Film
HS code 3920992848 is an 10-digit code for Other Plastic Sheets and Film, under the 6-digit subheading 392099. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 3920992848HS Code 3920992848 Description by Country
3920992848 is listed across 27 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Austria HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Belgium HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Bulgaria HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Croatia HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Cyprus HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Czech Republic HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Denmark HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Estonia HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Finland HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
France HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Germany HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Greece HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Hungary HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Ireland HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Italy HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Latvia HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Lithuania HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Luxembourg HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Malta HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Netherlands HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Poland HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Portugal HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Romania HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Slovakia HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Slovenia HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Spain HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Sweden HS Code
HS Code 3920992848 Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)
Frequently Asked Questions
What is HS code 3920992848?
HS code 3920992848 is an 10-digit code for Other Plastic Sheets and Film, under the 6-digit subheading 392099 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 3920992848 the same in every country?
Which countries use HS code 3920992848?