HS Code 39011010: Low-Density Polyethylene (LDPE)
HS code 39011010 is an 8-digit code for Low-Density Polyethylene (LDPE), under the 6-digit subheading 390110. The first 6 digits are standardized worldwide; the digits beyond are set by each country.
See real import & export shipment data for 39011010HS Code 39011010 Description by Country
39011010 is listed across 66 countries' HS schedules. The table below shows how each country defines it under its own standard, with the local description and a link to its real import and export trade data.
Albania HS Code
HS Code 39011010000 Linear polyethylene with a specific gravity of < 0,94, in primary forms
Algeria HS Code
HS Code 3901101000 Polyéthylène d'une densité < 0,94, sous formes primaires : Sous forme liquides ou pâteux, y compris les émulsions, dispersions etsolutions
Argentina HS Code
HS Code 39011010 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0.94: Lineal
Armenia HS Code
HS Code 3901101000 Linear polyethylene
Austria HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Azerbaijan HS Code
HS Code 3901101000 Polyethylene with a specific gravity of < 0,94, in primary forms : linear polyethylene
Bangladesh HS Code
HS Code 39011010 Polyethylene with a specific gravity of < 0,94, in primary forms : Polyethylene..tpmc imp. by vat reg. elec. fan motor or water pump motor manf. ind.
Belarus HS Code
HS Code 3901101000 Linear polyethylene
Belgium HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Bosnia and Herzegovina HS Code
HS Code 3901101000 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear polyethylene
Bulgaria HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Canada HS Code
HS Code 3901101000 Polyethylene,molecular wt>=3 million<=6,f mfr rod,stick/profile shape of 391
Chile HS Code
HS Code 39011010 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0.94: De alta presión (convencional)
Croatia HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Cyprus HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Czech Republic HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Denmark HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Estonia HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Ethiopia HS Code
HS Code 39011010 Polyethylene with a specific gravity of < 0,94, in primary forms : Granules
Finland HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
France HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Georgia HS Code
HS Code 39011010000 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear polyethylene
Germany HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Gibraltar HS Code
HS Code 39011010 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear polyethylene
Greece HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Hungary HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
India HS Code
HS Code 39011010 LINEAR L0W DENSITY P0LYETHYLENE (LLDPE)
Iran (Islamic Republic of) HS Code
HS Code 39011010 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear low density polyethylene (LLDPE)
Ireland HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Italy HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Kazakhstan HS Code
HS Code 3901101000 Linear polyethylene
Korea, Republic of HS Code
HS Code 3901101000 Linear low-density polyethylene
Kosovo HS Code
HS Code 3901101000 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear polyethylene
Kyrgyzstan HS Code
HS Code 3901101000 Linear polyethylene
Latvia HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Lithuania HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Luxembourg HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Malta HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Mayotte HS Code
HS Code 39011010 Polymères de l'éthylène, sous formes primaires: Polyéthylène d'une densité inférieure à 0,94: Polyéthylène linéaire
Moldova, Republic of HS Code
HS Code 390110100 Linear polyethylene with a specific gravity of < 0,94, in primary forms
Montenegro HS Code
HS Code 3901101000 Linear polyethylene with a specific gravity of < 0,94, in primary forms
Morocco HS Code
HS Code 3901101000 Polymères de l’éthylène, sous formes primaires: Polyéthylène d’une densité inférieure à 0, 94: produits liquides ou pâteux, y compris les émulsions, dispersions et solutions
Netherlands HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
North Macedonia, Republic of HS Code
HS Code 3901101000 Linear polyethylene with a specific gravity of < 0,94, in primary forms
Panama HS Code
HS Code 39011010 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0,94: Líquidos y pastas incluidas las dispersiones (emulsiones y suspensiones) y las disoluciones
Paraguay HS Code
HS Code 39011010 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0.94: Lineal
Poland HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Portugal HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Romania HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Russian Federation HS Code
HS Code 3901101000 Linear polyethylene
Serbia HS Code
HS Code 3901101000 Linear polyethylene with a specific gravity of < 0,94, in primary forms
Slovakia HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Slovenia HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
South Africa HS Code
HS Code 39011010 Virgin
Spain HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Sweden HS Code
HS Code 3901101020 Linear polyethylene with a specific gravity of < 0,94, in primary forms : High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
Tajikistan HS Code
HS Code 3901101000 Polyethylene having a specific gravity of less than 0,94: Linear polyethylene
Tunisia HS Code
HS Code 39011010009 Polyethylene lineaire,d'une densite inferieure a 0,94
Turkey HS Code
HS Code 390110100000 Linear polyethylene; specific gravity < 0.94 (in primary forms)
Ukraine HS Code
HS Code 3901101000 Linear polyethylene
United Kingdom HS Code
HS Code 3901101020 High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2.16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0.922 g/cm³ or more, but not more than 0.926 g/cm³ and -a vicat softening temperature of min. 94 °c
United States of America HS Code
HS Code 3901101000 Having a relative viscosity of 1.44 or more
Uruguay HS Code
HS Code 3901101000 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0.94: Lineal
Uzbekistan HS Code
HS Code 3901101000 Polyethylene with a specific gravity of < 0,94, in primary forms : Linear polyethylene
Venezuela (Bolivarian Republic of) HS Code
HS Code 3901101000 Polímeros de etileno en formas primarias: Polietileno de densidad inferior a 0.94: Lineal
Yemen HS Code
HS Code 39011010 Polyethylene having a specific gravity of less than 0.94 : For industry
Frequently Asked Questions
What is HS code 39011010?
HS code 39011010 is an 8-digit code for Low-Density Polyethylene (LDPE), under the 6-digit subheading 390110 of the Harmonized System. The first 6 digits are standardized worldwide; the rest are national.
Is HS code 39011010 the same in every country?
Which countries use HS code 39011010?