What is HS code 870850 in Denmark?

HS code 870850 covers Parts and accessories of the motor vehicles of headings 8701 to 8705 : Driveaxles with differential, whether or not provided with other transmission components, and nondriving axles; parts thereof in Denmark. It sits in Chapter 87 (Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof), Heading 8708 of the Harmonized System, and is classified under CN / TARIC.

Is HS code 870850 the same across all countries?

Yes — up to the 6-digit level, HS code 870850 is the same in every WCO member country. Beyond 6 digits, each country extends the code for national tariff and statistical use. Denmark extends it under CN / TARIC.

What system does Denmark use to classify HS code 870850?

Denmark classifies products under the Combined Nomenclature / TARIC (CN / TARIC; locally Kombineret Nomenklatur), which extends HS codes to 10 digits. The first 6 digits align with the WCO Harmonized System, and the rest cover national tariff and statistical needs.

Where can I officially look up HS code 870850 in Denmark?

The official source is https://www.toldst.dk/. For faster cross-country lookups, TradeInt's HS Code Tool consolidates classifications across all major countries in one place.

HS Code 870850 Vehicle Drive Axles in Denmark

HS Code 870850

Parts and accessories of the motor vehicles of headings 8701 to 8705 : Driveaxles with differential, whether or not provided with other transmission components, and nondriving axles; parts thereof

HS Code 8708502015

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened"

HS Code 8708502035

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened"

HS Code 8708502045

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened"

HS Code 8708502060

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:- at least an actuator,- whether or not an interior distribution by chain"

HS Code 8708502090

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Other"

HS Code 8708502025

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened"

HS Code 8708502050

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Double flange bearing of 3rd generation, for motor vehicles,-|with double-row ball bearing,-|whether or not with impulse (encoder) ring,-|whether or not with antilock brake system (ABS) sensor,-|whether or not with mounted screws,for use in the manufacture of goods of chapter 87"

HS Code 8708502070

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:-an outer diameter of 67,0 mm or more but not more than 84,5 mm,-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,-spline with 21 teeth or more but not more than 35,-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves"

HS Code 8708502055

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened"

HS Code 8708502065

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Intermediate steel shaft connecting the gearbox with semi-axle with:-a length of 300 mm or more but not more than 650 mm,-a spline end on both sides,-whether or not with a pressed bearing in the case,-whether or not with a holderfor use in the manufacture of goods of Chapter 87"

HS Code 8708502075

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees"

HS Code 8708502040

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148|mm (± 1|mm)| x 213|mm (± 1|mm) x 273|mm (± 1|mm)| comprising at least: -|two electro-magnetic one direction clutches in one cage, working in both directions, -|an input shaft with outer diameter of 24|mm (± 1|mm), ended with spline of 22, -|a coaxial output bushing with inner diameter of 22|mm or more but not more than 30|mm, ended with spline of 22|teeth or more but not more than 28|teethfor use in the manufacture of all-terrain or utility task vehicles"

HS Code 8708502020

"Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine ""diesel or semi-diesel engine"" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s : Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle -|of a length of| 1|m or more but not more than 2|m, -|of a weight of 6|kg or more but not more than 9|kg"

HS Code 8708503500

Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20)

HS Code 8708505590

Parts for drive-axles with differential, whether or not provided with other transmission components, and for non-driving axles, of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20) : Other

HS Code 8708509190

Parts for non-driving axles, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20 and of closed-die forged steel) : Other

HS Code 8708509915

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:- at least an actuator,- whether or not an interior distribution by chain

HS Code 8708509990

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Other

HS Code 8708505520

Parts for drive-axles with differential, whether or not provided with other transmission components, and for non-driving axles, of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20) : Double flange bearing of 3rd generation, for motor vehicles,-|with double-row ball bearing,-|whether or not with impulse (encoder) ring,-|whether or not with antilock brake system (ABS) sensor,-|whether or not with mounted screws,for use in the manufacture of goods of chapter 87

HS Code 8708505550

Parts for drive-axles with differential, whether or not provided with other transmission components, and for non-driving axles, of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20) : Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

HS Code 8708509945

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

HS Code 8708509940

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Double flange bearing of 3rd generation, for motor vehicles,-|with double-row ball bearing,-|whether or not with impulse (encoder) ring,-|whether or not with antilock brake system (ABS) sensor,-|whether or not with mounted screws,for use in the manufacture of goods of chapter 87

HS Code 8708509925

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:-an outer diameter of 67,0 mm or more but not more than 84,5 mm,-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,-spline with 21 teeth or more but not more than 35,-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

HS Code 8708509950

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

HS Code 8708509960

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

HS Code 8708509920

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Intermediate steel shaft connecting the gearbox with semi-axle with:-a length of 300 mm or more but not more than 650 mm,-a spline end on both sides,-whether or not with a pressed bearing in the case,-whether or not with a holderfor use in the manufacture of goods of Chapter 87

HS Code 8708509955

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened

HS Code 8708509935

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees

HS Code 8708509930

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148|mm (± 1|mm)| x 213|mm (± 1|mm) x 273|mm (± 1|mm)| comprising at least: -|two electro-magnetic one direction clutches in one cage, working in both directions, -|an input shaft with outer diameter of 24|mm (± 1|mm), ended with spline of 22, -|a coaxial output bushing with inner diameter of 22|mm or more but not more than 30|mm, ended with spline of 22|teeth or more but not more than 28|teethfor use in the manufacture of all-terrain or utility task vehicles

HS Code 8708509910

Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel) : Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle -|of a length of| 1|m or more but not more than 2|m, -|of a weight of 6|kg or more but not more than 9|kg

HS Code 8708509110

Parts for non-driving axles, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20 and of closed-die forged steel) : Double flange bearing of 3rd generation, for motor vehicles,-|with double-row ball bearing,-|whether or not with impulse (encoder) ring,-|whether or not with antilock brake system (ABS) sensor,-|whether or not with mounted screws,for use in the manufacture of goods of chapter 87

HS Code 870850: Parts and accessories of the motor vehicles of headings 8701 to 8705 : Driveaxles with differential, whether or not provided with other transmission components, and nondriving axles; parts thereof in Denmark

What is HS Code 870850 in Denmark

Classification Path of HS Code 870850 in Denmark

Denmark Tariff Classification: Combined Nomenclature / TARIC (CN / TARIC)

Top Trading Product of HS Code 8708

Top Denmark import Product Under HS Code 8708

Top Denmark export Product Under HS Code 8708

Related HS Code to Denmark Vehicle Drive Axles (870850)

Frequently Asked Questions