HS Code 3920995300: Ion-exchange membranes of fluorinated non-cellular plastic material, for use in chlor-alkali electrolytic cells in Denmark

Polyimide sheet and strip, non-cellular, uncoated, or coated or covered solely with plastic, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, and floor, wall and ceiling coverings in heading 3918)

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Polymer film containing the following monomers: -|poly (tetramethylene ether glycol), -|bis (4-isocyanotocyclohexyl) methane, -|1,4-butanediol or 1,3-butanediol, -|with a thickness of 0,25|mm or more but not more than 5,0|mm, -|embossed with a regular pattern on one surface, -|and covered with a release sheet

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Transparent polyurethane film metallised on one side: -|with a gloss of more than 90|degrees according to ASTM|D2457 -|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -|covered on the other side with a protective poly(ethylene terephthalate) film -|with a total thickness of more than 204|µm but not more than 244|µm

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Thermoplastic polyurethane film, of a thickness of 250|?m or more but not more than 350|?m, covered on one side with a removable protective film

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Matt, thermoplastic polyurethane foil in rolls with: -|a width of 1640|mm| (± 10|mm), -|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457), -|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287), -|a thickness of more than 365|µm but not more than 760|µm, -|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)), -|an elongation to break of 470|% (as determined by the method: EN|ISO|527)

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,| -|with a protective layer of poly(ethylene terephthalate) on the other side, and -|with a width of 5|cm or more but not more than 100|cm -|with a length of not more than 2|000|m

Plates, sheets, film, foil and strip, of non-cellular condensation polymerization products and rearrangement polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. self-adhesive products, floor, wall and ceiling coverings in heading 3918 and polyimide sheet and strip, uncoated, or coated or covered solely with plastic) : Other

"Poly(vinyl fluoride) sheet, and biaxially oriented non-cellular poly""vinyl alcohol"" film containing by weight >= 97% of poly""vinyl alcohol"", uncoated, of a thickness of <= 1 mm, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918)"

"Plates, sheets, film, foil and strip, of non-cellular addition polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""vinyl fluoride"" sheet, ion-exchange membranes of fluorinated plastic material for use in chlor-alkali electrolytic cells and biaxially oriented poly""vinyl alcohol"" film containing by weight >= 97% of poly""vinyl alcohol"", uncoated, of a thickness of <= 1 mm) : For use in certain types of aircraft"