Denmark HS Code

HS Code 3920621908: "Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side" in Denmark

Q: What is HS code 3920621908 in Denmark?

HS code 3920621908 covers "Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of = 100 but = 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side" in Denmark. It sits in Chapter 39 (Plastics and articles thereof), Heading 3920 of the Harmonized System, and is classified under CN / TARIC.

Q: Is HS code 3920621908 the same across all countries?

Only the first 6 digits of HS code 3920621908 are internationally harmonized. The remaining digits are added by Denmark under CN / TARIC and are not directly comparable to other countries' codes.

Q: What system does Denmark use to classify HS code 3920621908?

Denmark classifies products under the Combined Nomenclature / TARIC (CN / TARIC; locally Kombineret Nomenklatur), which extends HS codes to 10 digits. The first 6 digits align with the WCO Harmonized System, and the rest cover national tariff and statistical needs.

Q: Where can I officially look up HS code 3920621908 in Denmark?

The official source is https://www.toldst.dk/. For faster cross-country lookups, TradeInt's HS Code Tool consolidates classifications across all major countries in one place.

What is HS Code 3920621908 in Denmark

Under Denmark's Combined Nomenclature / TARIC (Kombineret Nomenklatur), HS Code 3920621908 is classified as "Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side". Denmark's tariff system extends the WCO Harmonized System to 10 digits with national subdivisions. 3920621908 belongs to Section VII: Plastics and articles thereof; rubber and articles thereof, Chapter 39: Plastics and articles thereof, Heading 3920: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials.

Explore more 2026 Latest Denmark import export trade data and shipment records for HS Code PET Sheets and Film on TradeInt global trade data platform

Classification Path of HS Code 3920621908 in Denmark

Section VII

Chapters (39-40) Plastics and articles thereof; rubber and articles thereof

Chapter 39

Plastics and articles thereof

HS Code 3920

Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials

HS Code 3920621908

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side"

Denmark Tariff Classification: Combined Nomenclature / TARIC (CN / TARIC)

In Denmark, HS 3920621908 is classified under the Combined Nomenclature / TARIC (Kombineret Nomenklatur) — a 10-digit national extension of the WCO 6-digit Harmonized System.

Tariff schedule Combined Nomenclature / TARIC (CN / TARIC)

Local name Kombineret Nomenklatur

Digits 10

Official source https://www.toldst.dk/

You know what 3920621908 means. Now see 2026 latest real trade activity for PET Sheets and Film in Denmark.

Buyers, suppliers, origin and destination countries, shipment dates, and quantities direct from customs records.

Search 2026 Latest Denmark Import Data Search 2026 Latest Denmark Export Data

Top Trading Product of HS Code 3920

Top Denmark import Product Under HS Code 3920

1 392010: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of polymers of ethylene $215.2M 2 392020: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of polymers of propylene $64.6M 3 392062: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of polycarbonates, alkyd resins, polyallyl esters or other polyesters : Of poly(ethylene terephthalate) $38.5M

Figures shown for 2024.

For more 2026 recent data, search for Denmark import trade records

Top Denmark export Product Under HS Code 3920

1 392010: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of polymers of ethylene $203.5M 2 392099: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of other plastics : Of other plastics $54.2M 3 392020: Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials : Of polymers of propylene $18.0M

Figures shown for 2024.

For more 2026 recent data, search for Denmark export trade records

Related HS Code to Denmark PET Sheets and Film (3920621908)

HS Code 3920621200

"Poly(ethylene terephthalate) film of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks, and poly""ethylene terephthalate"" film, not reinforced, of a thickness of >= 100 micrometres but <= 150 micrometres, for the manufacture of photopolymer printing plates"

HS Code 3920621905

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|?m or more but not more than 0,06|?m"

HS Code 3920621912

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material"

HS Code 3920621918

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material"

HS Code 3920621920

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers"

HS Code 3920621938

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm"

HS Code 3920621948

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|?m (±|3|?m)"

HS Code 3920621952

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)"

HS Code 3920621960

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm"

HS Code 3920621968

"Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 ?m or more but not more than 350 ?m, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 ?m or more but not more than 0,06 ?m"

3920621908 in Other Countries

See how 3920621908 (PET Sheets and Film) is classified across other countries, each with its own national code and local description.

Compare 3920621908 across countries

Frequently Asked Questions

What is HS code 3920621908 in Denmark?

HS code 3920621908 covers "Plates, sheets, film, foil and strip, of non-cellular poly""ethylene terephthalate"", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly""ethylene terephthalate"" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly""ethylene terephthalate"" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) : Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side" in Denmark. It sits in Chapter 39 (Plastics and articles thereof), Heading 3920 of the Harmonized System, and is classified under CN / TARIC.

Is HS code 3920621908 the same across all countries?

What system does Denmark use to classify HS code 3920621908?

Where can I officially look up HS code 3920621908 in Denmark?